Neil's belated and painfully slow 0.4 alpha build
Re: Neil's belated and painfully slow 0.4 alpha build
Subscribed for EDIS progress and moral support!
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Neil's belated and painfully slow 0.4 alpha build
Thanks for moral support Pishta, a bit of progress after being distracted by business travel and a reluctant wide band. Tested serial access, verified logging, stopped and restarted logging, requested firmware version (benchtest), that sort of thing.
BRV, IAT, and AAT circuits built. The latter 2 required quite a bit of patching on the 0.4. Needs a good dip in alcohol now (the board, I mean). Pics to follow.
BRV, IAT, and AAT circuits built. The latter 2 required quite a bit of patching on the 0.4. Needs a good dip in alcohol now (the board, I mean). Pics to follow.
Re: Neil's belated and painfully slow 0.4 alpha build
What is AAT? Did you mean AAP? Why would IAT need any patching? Progress is good! :-D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Neil's belated and painfully slow 0.4 alpha build
Oops yes I meant MAP and AAP. Haven't got to IAT yet.
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Neil's belated and painfully slow 0.4 alpha build
Pics as promised
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Neil's belated and painfully slow 0.4 alpha build
nearly complete
old style stim attached
testing inputs
rpm still to be decided as I want to do edis first (for academic reasons only)Re: Neil's belated and painfully slow 0.4 alpha build
Im with you, Greek!AncientGeek wrote:I want to do edis first (for academic reasons only)
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: Neil's belated and painfully slow 0.4 alpha build
Thank you prishta.
I'd like to share with you a revelation I had during my time here, Mr Anderson.
It came to me when I tried to classify the Jag inputs and outputs.
I realised that 12V-OUTPUT is not actually an output but an input for the outputs!
I'd like to share with you a revelation I had during my time here, Mr Anderson.
It came to me when I tried to classify the Jag inputs and outputs.
I realised that 12V-OUTPUT is not actually an output but an input for the outputs!
Last edited by AncientGeek on Sat Apr 19, 2014 9:36 am, edited 1 time in total.
Re: Neil's belated and painfully slow 0.4 alpha build
Can you elaborate? Is this a 0.4 issue or is it carried over to 0.6 too?AncientGeek wrote: I realised that 12V-OUTPUT is not actually an output but an input for the outputs!
Re: Neil's belated and painfully slow 0.4 alpha build
Purely naming.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!