 |
FreeEMS-Tuner Development Diary - Comments
Author |
Message |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
sry_not4sale wrote: Thank you for your patches! You're welcome, but I didn't send you patches, I commited to the project.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Thu Apr 22, 2010 1:44 am |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
I fixed up my commits to include more comments and the change to the comment in the tuning grid file. Fork/pull from my repo until Aaron finds the time to bring his back inline with it : http://github.com/fredcooke/freeems-tunerIf you previously pulled yesterday from my last pushes or Aaron's last pushes, wipe that out with a : Code: git reset --hard 9d978368ad09d55cca5a8d9272d1bc46e4eafd3e Before pulling from mine again. I had someone volunteer to work on the tuner unprompted tonight, so perhaps we'll start seeing some more action on it from them until Aaron's work situation quiets down a bit again :-) Fred.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Thu Apr 22, 2010 1:45 pm |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
http://stuff.fredcooke.com/serial.overflow.pngI couldn't copy/paste the text... The highlighted bit is the bit of interest. That is a clean start of the app, and connect to the device, and nothing else. Note, device was pumping out packets just as it was in welly, but none being recieved. Dodgy serial again? Probably. Though this is the adapter me and rob used for tuning in the USA. It's also the adapter I was using just before leaving. In any case, something is wrong. It'd be nice to get some stats out of it on what sort of data it's getting, rejection reasons, etc. Plus, of course, it shouldn't die, it should just be dropping data, not ever overflowing or whatever caused the error. Second error is just from unplugging it... Thoughts? Fred.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Sun May 02, 2010 12:29 pm |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
Awesome :-) You know about the serial review thread, right? I can link it, if not. I need to review myself and also get Dave involved as he has significant practical experience in this area.
Fred.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Mon May 10, 2010 4:36 am |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
Hey, any chance of table save/load? This is a genuine request and a test of the active topics fix.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Wed Oct 20, 2010 2:21 am |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
http://stuff.fredcooke.com/freeems-0.1. ... .table.xmlI added table save to file functionality in a rudimentary form. I'm going to work on reloading it now, in an equally rudimentary form. Fred.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Fri Oct 22, 2010 7:55 am |
|
 |
Fred
Moderator
Joined: Tue Jan 15, 2008 2:31 pm Posts: 15222 Location: Home sweet home!
|
Aaron, can you please indicate your intention to maintain FreeEMS-Tuner and keep it inline with current comms standards. If you're not willing/able to do that, do you mind if I move this forum section into the software specific tools area? I've not migrated ECUManager to the front page as Marcos hasn't kept up with the changes either. I'll be happy to migrate either of them back to the front if/when they are maintained and useful tools for a FreeEMS user or dev. Right now neither are. I tried to fix both and failed.
Bringing the python tuner upto date wouldn't be a big deal, just a few extra fields in the table request and a change of header structure and meaning in the packet defs. There are new services too, but you don't have to bother with them, just as long as their aren't regressions, it's OK by me.
I'll leave it here for now, but it won't be long and this site will be seeing a lot more traffic and I don't want people stumbling around trying to make non-wrking apps work, blaming themselves and getting frustrated. If I see no response before 0.1.2 is released then I'll move it anyway. I hope you don't mind.
Fred.
_________________DIYEFI.org - where Open Source means Open Source, and Free means Freedom FreeEMS.org - the open source engine management system FreeEMS dev diary and its comments thread and my turbo truck!n00bs, do NOT PM or email tech questions! Use the forum! The ever growing list of FreeEMS success stories!
|
Fri Jan 14, 2011 2:07 am |
|
 |
sry_not4sale
LQFP144 - On Top Of The Game
Joined: Mon Mar 31, 2008 12:47 am Posts: 568 Location: New Zealand, land of the long white burnout
|
Move away  Unfortunately due to time constraints I am unable to maintain the FreeEMS-Tuner at this time.
_________________ Owner / Builder: 1983 Mazda Cosmo 12at (1200cc 2-rotor turbo) coupe [SPASTK] 165hp @ 6psi standard - fastest production car in japan Oct 82
|
Fri Jan 14, 2011 2:12 am |
|
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|
 |