boostedcabbage's 1998 Dodge Neon
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
boostedcabbage's 1998 Dodge Neon
I picked this up the other day. Motor is popped and the extent of the damage is unknown yet. The plan is to drop in my other built motor from the white Neon.
More details and updates coming soon.
More details and updates coming soon.
Re: boostedcabbage's 1998 Dodge Neon
What's all that white shit on the ground? You should really clean that up.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: boostedcabbage's 1998 Dodge Neon
Looks like some kind of corrosion?
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
Re: boostedcabbage's 1998 Dodge Neon
Made a little progress today. Pulled the engine.
The intercooler and piping had probably a half quart of oil in them
Next step is to clean up the engine bay in preparation for the other engine.
The intercooler and piping had probably a half quart of oil in them
Next step is to clean up the engine bay in preparation for the other engine.
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
Re: boostedcabbage's 1998 Dodge Neon
No wheels, axles, ball joints. No problem. Tractor ftw.
Cleaned the engine bay a bit with a pressure washer.
Still needs a heavy degreasing, but much better than it was.
Cleaned the engine bay a bit with a pressure washer.
Still needs a heavy degreasing, but much better than it was.
Re: boostedcabbage's 1998 Dodge Neon
Good progress! Thanks for keeping us updated. I appreciate it! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
Re: boostedcabbage's 1998 Dodge Neon
Rust!
More engine bay prep and painting when weather permits.
More engine bay prep and painting when weather permits.
-
- TO92 - Vaguely active
- Posts: 1
- Joined: Mon Feb 27, 2017 5:45 pm
- Location: Merseyside
- Contact:
Re: boostedcabbage's 1998 Dodge Neon
Looks class, any update on how you're getting on with this?
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
Re: boostedcabbage's 1998 Dodge Neon
Engine bay paint. (Blacks adds 5hp)
-
- QFP80 - Contributor
- Posts: 32
- Joined: Wed May 13, 2015 5:51 pm
Re: boostedcabbage's 1998 Dodge Neon
Short block almost installed. Left motor mount is toast. (Going to fill it)
Needs a cleaning. Been sitting outside all winter with duct tape over the deck
Trans and new clutch install coming soon.
Needs a cleaning. Been sitting outside all winter with duct tape over the deck
Trans and new clutch install coming soon.