FreeEMS Board ruzki For Sale

If you want to sell that old MegaSquirt or Link hardware, here's the place to try.
molak
QFP80 - Contributor
Posts: 37
Joined: Fri Aug 13, 2010 6:07 am

Re: FreeEMS Board ruzki For Sale

Post by molak »

Great!
KLAS
DIP8 - Involved
Posts: 16
Joined: Tue Jun 18, 2013 8:54 pm

Re: FreeEMS Board ruzki For Sale

Post by KLAS »

just arrived
Attachments
freeems ruzki pcb.jpeg
User avatar
AiToR51
QFP80 - Contributor
Posts: 80
Joined: Sun Aug 21, 2011 6:26 pm
Location: Spain

Re: FreeEMS Board ruzki For Sale

Post by AiToR51 »

Received it, looks fine. Can you supply as a pin mapping? So I can now which processor pin goes to each MS board pin
Sierra XR4i 2.0T
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: FreeEMS Board ruzki For Sale

Post by Fred »

Check the git repo, I asked for this before and it may be there? If not, some docs are essential, as there is no such thing as a standard MS pin out anyway.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
AiToR51
QFP80 - Contributor
Posts: 80
Joined: Sun Aug 21, 2011 6:26 pm
Location: Spain

Re: FreeEMS Board ruzki For Sale

Post by AiToR51 »

Fred wrote:Check the git repo, I asked for this before and it may be there? If not, some docs are essential, as there is no such thing as a standard MS pin out anyway.
Yes, I've checked the git repo but didn't found it neither an schematic (in pdf. I don't have specific board design software)
Sierra XR4i 2.0T
User avatar
ruzki
QFP80 - Contributor
Posts: 86
Joined: Thu Jun 20, 2013 4:24 pm

Re: FreeEMS Board ruzki For Sale

Post by ruzki »

sorry for late answer .. was ill the last days ..

Image

not that iac are not real iac ports as there is no stepper driver on the board

Georg
Attachments
pinout.JPG
User avatar
ruzki
QFP80 - Contributor
Posts: 86
Joined: Thu Jun 20, 2013 4:24 pm

Re: FreeEMS Board ruzki For Sale

Post by ruzki »

will add the schematic as pdf file to git in the next days

Georg
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: FreeEMS Board ruzki For Sale

Post by Fred »

It'd be nice if the labels were consistent with the project terminology. Eg:

Crank >> RPM0
Cam >> RPM1
IAC >> ?
CANH and CANL >> ?
Inj* Ign* >> ?

etc

Ie, tell us how the CPU is attached to the pins in terms of core FreeEMS functions and Freescale pin names. Not intended functions.

I hope this helps. :-)

Fred.

PS, they arrived in Auckland :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
molak
QFP80 - Contributor
Posts: 37
Joined: Fri Aug 13, 2010 6:07 am

Re: FreeEMS Board ruzki For Sale

Post by molak »

my friend in chile got it ...

Image

I have to wait for him now! :evil:
User avatar
ruzki
QFP80 - Contributor
Posts: 86
Joined: Thu Jun 20, 2013 4:24 pm

Re: FreeEMS Board ruzki For Sale

Post by ruzki »

Great !

Georg.
Post Reply