Even something like Maplin should be able to supply this.
http://www.maplin.co.uk/p/resin-dipped- ... itor-ra43w
At 44p, it won't break the bank! ;-)
IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Error
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
-
- TO220 - Visibile
- Posts: 8
- Joined: Tue Sep 03, 2013 8:11 am
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
thanks Fred - just tried to checkout at digikey and shipping was indeed £12!
-
- LQFP112 - Up with the play
- Posts: 148
- Joined: Sat Sep 29, 2012 9:16 pm
- Location: Rotterdam, the Netherlands
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
I have shitloads of passive components in my basement.. I'll have a look if I can find some 6.8nF caps, might be a lot cheaper for any european guys in need of a few since they fit envelopes just fine.
FABRICA MI DIEM, PVNC!
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
I used the 'ask a question' function to ask Maplin a couple of days ago whether those are C0G NP0 but they haven't answered yet. Andy mentioned that larger problems than those caused by the capacitance being out by an order of magnitude could be introduced unless I stuck to the values he gave, I take serious dev comments seriously
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
X7R will be just fine, I promise. :-p
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Thank you Fred
Dave.
Dave.
- ToxicGumbo
- LQFP144 - On Top Of The Game
- Posts: 474
- Joined: Tue Jan 03, 2012 8:37 pm
- Location: Manhattan, KS. USA
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
I lied and haven't done anything to my Jaguar except drive it around blindly on pedestrian streets and highways.
That is all.
-Jeff
That is all.
-Jeff
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
- ToxicGumbo
- LQFP144 - On Top Of The Game
- Posts: 474
- Joined: Tue Jan 03, 2012 8:37 pm
- Location: Manhattan, KS. USA
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Months later, C7 replaced.
-Jeff
-Jeff
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
C7 ordered...thanks.
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
I've finally fixed mine.
No difference observed after a few drives, which is good, because it means I didn't screw it up.
Thanks,
No difference observed after a few drives, which is good, because it means I didn't screw it up.
Thanks,
<@TekniQue> but in the end, it's code that makes a computer useful