Pin out research thread - proof that i'm working on it lol

From DIY contraptions to sophisticated FreeEMS-specific designs! Plus general hardware development!
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Pin out research thread - proof that i'm working on it l

Post by Fred »

I did test this with the saleae a few weeks ago (3 or 4) and found it to be the case that if i just hit the pull up control reg earlier in the boot sequence the length of time post reset that the pin stays on was affected, so it's almost certain.

I've also done some work on the actual pin out requirements and that can be found in the following issue on the tracker:

http://issues.freeems.org/view.php?id=190
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply