boards compatibles?

From DIY contraptions to sophisticated FreeEMS-specific designs! Plus general hardware development!
Post Reply
jenylaloka
TO220 - Visibile
Posts: 4
Joined: Fri Nov 28, 2014 2:09 pm

boards compatibles?

Post by jenylaloka »

hello iam jeny, live in spain . mi englis is very bad. sorry . heheeh

I love yourssss work is wonderful.

keep it up! I voi porting all the help I can.

estoyi immersed in an autonomous car project. controlled by two pc, dual camera, 8 ultrasonicps sensors ..... eeeeeeeetccccc

currently has 7 arduino, nano, mega, one ... xD and as no? I needed control and eliminate injection ecu siemens .. buagg can bus ..... is not more beautiful rs232? ? hehehe

conduction is performed labview, Arduino send variables and move all actuators engines ...

and what was, placasbase burn like, but idk if will be compatible codes. I've looked and my are all equal hehehe.

1 idea

rasperry + IO extension board. + lcd 13.3 "
and linux installed and freeEMS code in a thread .... I have no idea how to do it, and I can not all alone.

you think? us we put it?

2nd thought:

1 idea + MC9S12XS128MAL Minimum System Board for Smart Car 112 Pins

http://www.ebay.es/itm/201095224986?ssP ... 1423.l2649

and the two together works better!

3rd notion

Cubieboard Allwinner A10 SOC MiniPC extend Cubieboard1 96 pin SPI I2C


http://www.ebay.com/itm/Cubietech-Cubie ... rkt%3D4%26

pcb and lowwwwwww costttt good ... not?

remapr ke open all libraries and phew I can not. fear

c'mon c'mon guys who have installed ke me freeEMS in my car RENAULT LAGUNA 1.8 GASOLINE only with injector, lambda, tps, map, and little else. hehehehee


by the way, also this is because i need to delay the ignition. I'm using HHO cells and is highly explosive jijijiji .... is futureeeeeee

I loveeeeeeeeeee

bssssssss
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: boards compatibles?

Post by Fred »

Hola Jeny de Andalucia! Como estas? Un poco loco como mi mujer? Es normal para chicas de Espanya ;-)

Gracias para tus palabras jeniales :-)

No puedes usar FreeEMS en otra processadores. Solo XDP512. En futura otra proccessardores, pero no ahora, y no pronto tampoco.

Sorry for my broken Castellano, though I'm sure you've understood ;-)

Saludos cordiales,

Fredito.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
jenylaloka
TO220 - Visibile
Posts: 4
Joined: Fri Nov 28, 2014 2:09 pm

Re: boards compatibles?

Post by jenylaloka »

hellooo.... ohhh ... ok lets go and search 512......

two days after...

iam buy in ebay thissss model.

yesssssssss

and buy this programer is good??? recomendede ?

buy ? or other ?

http://www.ebay.es/itm/Freescale-USBDM- ... 1e7e199704


i loveeeeeeee thanks

jeny
Attachments
$_35.JPG
(22.87 KiB) Not downloaded yet
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: boards compatibles?

Post by Fred »

Buy this one, and keep first-world countries working: http://www.coolefi.com/usbdm.php

Also, with this one you won't need to update your USBDM firmware as much, and lower risk of it being wrong.

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply