boards compatibles?
Posted: Sat Nov 29, 2014 1:03 am
hello iam jeny, live in spain . mi englis is very bad. sorry . heheeh
I love yourssss work is wonderful.
keep it up! I voi porting all the help I can.
estoyi immersed in an autonomous car project. controlled by two pc, dual camera, 8 ultrasonicps sensors ..... eeeeeeeetccccc
currently has 7 arduino, nano, mega, one ... xD and as no? I needed control and eliminate injection ecu siemens .. buagg can bus ..... is not more beautiful rs232? ? hehehe
conduction is performed labview, Arduino send variables and move all actuators engines ...
and what was, placasbase burn like, but idk if will be compatible codes. I've looked and my are all equal hehehe.
1 idea
rasperry + IO extension board. + lcd 13.3 "
and linux installed and freeEMS code in a thread .... I have no idea how to do it, and I can not all alone.
you think? us we put it?
2nd thought:
1 idea + MC9S12XS128MAL Minimum System Board for Smart Car 112 Pins
http://www.ebay.es/itm/201095224986?ssP ... 1423.l2649
and the two together works better!
3rd notion
Cubieboard Allwinner A10 SOC MiniPC extend Cubieboard1 96 pin SPI I2C
http://www.ebay.com/itm/Cubietech-Cubie ... rkt%3D4%26
pcb and lowwwwwww costttt good ... not?
remapr ke open all libraries and phew I can not. fear
c'mon c'mon guys who have installed ke me freeEMS in my car RENAULT LAGUNA 1.8 GASOLINE only with injector, lambda, tps, map, and little else. hehehehee
by the way, also this is because i need to delay the ignition. I'm using HHO cells and is highly explosive jijijiji .... is futureeeeeee
I loveeeeeeeeeee
bssssssss
I love yourssss work is wonderful.
keep it up! I voi porting all the help I can.
estoyi immersed in an autonomous car project. controlled by two pc, dual camera, 8 ultrasonicps sensors ..... eeeeeeeetccccc
currently has 7 arduino, nano, mega, one ... xD and as no? I needed control and eliminate injection ecu siemens .. buagg can bus ..... is not more beautiful rs232? ? hehehe
conduction is performed labview, Arduino send variables and move all actuators engines ...
and what was, placasbase burn like, but idk if will be compatible codes. I've looked and my are all equal hehehe.
1 idea
rasperry + IO extension board. + lcd 13.3 "
and linux installed and freeEMS code in a thread .... I have no idea how to do it, and I can not all alone.
you think? us we put it?
2nd thought:
1 idea + MC9S12XS128MAL Minimum System Board for Smart Car 112 Pins
http://www.ebay.es/itm/201095224986?ssP ... 1423.l2649
and the two together works better!
3rd notion
Cubieboard Allwinner A10 SOC MiniPC extend Cubieboard1 96 pin SPI I2C
http://www.ebay.com/itm/Cubietech-Cubie ... rkt%3D4%26
pcb and lowwwwwww costttt good ... not?
remapr ke open all libraries and phew I can not. fear
c'mon c'mon guys who have installed ke me freeEMS in my car RENAULT LAGUNA 1.8 GASOLINE only with injector, lambda, tps, map, and little else. hehehehee
by the way, also this is because i need to delay the ignition. I'm using HHO cells and is highly explosive jijijiji .... is futureeeeeee
I loveeeeeeeeeee
bssssssss