View unanswered posts | View active topics It is currently Wed Dec 13, 2017 8:32 am



This topic is locked, you cannot edit posts or make further replies.  [ 8 posts ] 
Board Usage Statistics 
Author Message
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
IE, where did they all end up? At least 23 running engines so far, half DIY, half boards, mostly Jaguars.

I'm hoping to document what proportion of people who buy a board end up using it on an engine. I guess we'll need a few classes of what happened. I'll do one post per spin of boards and a comments thread for feedback on how to categorise and/or increase success rates. This doesn't include DIY builds or TA purchases or other hand built one-off prototypes. Only batches spread around.

Categories

  • Taken to examine, not use.
  • Taken to use, never built.
  • Taken to use, built by user, never ran.
  • Taken to use, built by provider, never used.

List Of Hardware Spins

  1. 37 * Infamous Puma Spin 1 (first and last Puma board)
  2. 5 * Jaguar A3 (first bulk produced Jaguar)
  3. 5 * Jaguar A3.1 (KennyBug batch of Jaguars)
  4. 11 * Jaguar 0.4-alpha (first Jaguar with good ignition hw)
  5. 7 * PowerEFI F16 V1 (closed source secret squirrel project)
  6. 10 * Jaguar 0.6-alpha (first near-flawless FreeEMS board)
  7. 5 * OnionBoard V1 (companion board for CPU dev board)
  8. ? PowerEFI F16 V2, not included yet. (closed source secret squirrel project)
  9. 5 * Jaguar 0.6-alpha (Impregacy batch of Jaguars)
  10. 5?or? ruzki ms-compatible boards, not included yet. (December 19th ordered)
  11. 50 or 51? Jaguar 0.7-alpha, not included yet.

Total: 80 FreeEMS compatible PCBs professionally manufactured! Final result: 20/80

25.0%


If I forget something, a user, a board, a spin, etc, tell me in the comments thread: viewtopic.php?f=9&t=2276

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Sep 10, 2013 3:49 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
A whopping and optimistic 37 boards made it out into the wide world

1 Marcos ran his car for 5 minutes on top of a hill at idle.
1 I thrashed and eventually blew up my truck for a couple of weeks. (no fault of Puma or FreeEMS, my fault) Then moved it to the Hotel Hyundai. It now lives on my desk for testing.
1 Preston ran the mighty 4AGE from one

Preston built a few more, including mops' one.
Johntramp built one and never quite got it working.
Craig built one and never quite got it working.

5 went to San Diego in the care of Abe and never came back.
5-10 stayed in Argentina never to be seen again.
1 went to Joseph Davis and collected dust.
1 went to gimpy in the US and is dusty by now.

etc, more here: viewtopic.php?f=38&t=983

Final score: 3/37

Success rate:

8.1%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Sep 10, 2013 3:55 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
Lessons learned, a modest 5 boards made it out into the wide world. Additionally KennyBug had some made.

Andy ran his deuce on one.
I ran secret unlucky 13 on one.
Mike ran his 1987 383 V8 on one.
Hentai ran his Miata on one. Soon to run a different Miata!
Jeff ran his Tacoma on one.

All 5 ran.

More info: viewtopic.php?f=27&t=1848

Final result: 5/5

Success rate:

100%

Great work, Andy and everyone with an A3! :-)

KennyBug quietly produced another 5 boards out of Git without telling anyone:

KennyBug has 3 of his own spin of A3.1 or similar.
Mike has a blank KennyBug version, unused, likely won't be.
Dan has one KennyBug version, built for bench, won't run.

More info: viewtopic.php?f=67&t=1599

KennyBug's hit rate 0/5

0%

Lesson: Don't go out on your own on things. Keep in touch with the core devs.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Sep 10, 2013 4:11 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
Good result had, some improvements to be made, 11 units of 0.4 were rushed out with some flaws

Andy ran his S10 on one.
Engine 20 ran with one, beautifully.
Sim is running his Volvo with one.
piimae is running one on his 4agte!

4 ran.

Hopefuls:

AncientGeek has one in the build in SA.

Unused:

I have a blank for reference, won't run.
Masterkorp has one, built by Andy, collecting dust.
nostar has a blank and parts, no noise from him.
andg butchered one, no noise for ages.
Evie has one. No noise from her, yet.
Ronin7/Nathan has one. No noise from him.

None awol!

More info: viewtopic.php?f=27&t=2136

Final result: 4/11

Success rate:

36.4%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Sep 10, 2013 4:23 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
In a dark dusty corner, Sean secretly had 7 V1 F16 boards printed

Sean is running his R1 with one.
Sean briefly ran his LT1 with one that didn't work properly.

2 ran.

Unused:

Abe had a fully built one collecting dust and making me and Sean both mad. (a team!) But then returned it to Sean, who is now modifying it to go on his Camaro!

5 blanks remain with Sean AFAIK. 1 reserved for me.

More info via Morse code in the dark, encrypted.

Final result: 2/7

Success rate:

28.6%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Sep 10, 2013 4:26 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
A new batch of 10 0.6-alpha Jaguar units have been received by Andy!

As yet, none have been used, one is being built ASAP by Andy! :-)

1 has run/is running Andy's S10 truck!
1 has run/is running the WikiSpeed SGT01 car! (bare, built and extensively modified by me)
1 has run/is running Josh's B18 Mini! (SMD only, built by Josh, modified by me)
1 has run/is running the mighty HOTEL every day! :-)

None awol, yet!

1 SMD with Olli (via Josh) - built by Olli, modded by Olli and I, wired up, not fired up, yet
1 SMD with Mike - waiting for spare time
1 blank with pishta - in the build
1 blank with Dan - on the shelf
1 blank with E40Dnut - Built by Robert, only to have him turn his back on us
1 spare going for a US tour

More info: viewtopic.php?f=27&t=2291

Final result: 4/10

Success rate:

40.0%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Oct 15, 2013 5:46 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
A small batch of 5 V1 OnionBoards were ordered by MrOnion! This happened a while ago (date?) and I forgot to put it here. Shame on me.

1 has run/is running MrOnion's Golf!

None awol, yet!

1 awaits MrOnion running an engine on a stand with it
2 blank with me, one intended for hotel, the other of unknown destination
1 spare available for a good home

More info: viewtopic.php?f=77&t=1971

Final result: 1/5

Success rate:

20.0%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Wed Jan 29, 2014 11:06 pm
Profile WWW
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14910
Location: Home sweet home!
A small batch of 5 0.6-alpha Jaguar boards were ordered by Impregacy! This happened a while ago (mid march, date?) and I forgot to put it here. Shame on me.

1 Has run/is running his ride on lawn mower! :-o

2 are awaiting love with Impregacy!
1 part-populated is with nonamebrand!
1 blank is with Matthijs, being populated!

None awol, yet!

More info: viewtopic.php?f=27&t=2427

Final result: 1/5

Success rate:

20.0%

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sat Jul 05, 2014 8:54 am
Profile WWW
Display posts from previous:  Sort by  
This topic is locked, you cannot edit posts or make further replies.   [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.