a little question

Official FreeEMS vanilla firmware development, the heart and soul of the system!
Post Reply
fera
TO220 - Visibile
Posts: 5
Joined: Thu Sep 15, 2016 3:36 pm

a little question

Post by fera »

buenas noches desde argentina.

soy fera .. user. assembler. and programer de megasquirt 1 y 2.


estoy entrando en el tema de la programación de controladores .así que tengan paciencia por favor

en esto soy nuevo
tengo problemas para poder interpretar como cargar y de donde sacar el .s19 file.. y que tipo de programador necesito. si un bdm. o que?. tengo el xprogM. si puede servir. mejor

muchas gracias por su atención. en cualquier cosa que pueda serles útil . aquí estoy

fred . lei que lees bien el español pero te cuesta escribirlo.

lo mismo ami me sucede con el ingles

leo bien . escribo mal.

regards

Fera


sponsored by GOOGLE TRANSLATE :P :P :P


goodnight from Argentina.

I am fera .. user. assembler. and programer megasquirt 1 and 2.


I'm going into the issue of programming controllers .so please be patient

I'm new in this
I have problems to interpret how to load and where to get the file .S19 .. and what kind of programmer need. if a bdm. or what?. I have the xprogM. if I can use.

thank you very much for your attention. anything that may assist them. I'm here

fred. I read that you read Spanish well but you have trouble writing it.

the same thing happens with my English

I read well. but bad write.

regards

Fera
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: a little question

Post by Fred »

Double post! Leaving both this time. The other is here: viewtopic.php?p=42726#p42726

Answering tech here:

BDM is necessary if you have a bare chip on a board you've built or an incompatible SM on a development board.

If you get hardware from Andy with a working SM on it, then you do not need a BDM.

If you do need a BDM, Andy sells those too.

S19s are available for testing/playing around, but for your car we'll need to create one for you with your help. For testing/playing, here: http://builds.freeems.org/

I hope that helps. Espero que eso ayude.

Saludos cordiales,

Fredito.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
fera
TO220 - Visibile
Posts: 5
Joined: Thu Sep 15, 2016 3:36 pm

Re: a little question

Post by fera »

muchas gracias fred y perdón por postear mal..

me has sido de mucha ayuda

lo que yo estoy intentando hacer -es programar el controlador. y también poder hacer un firmare o un .s19

con el correr del tiempo. vamos a ver que sucede- si se puede o no.


saludos. fera
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: a little question

Post by Fred »

No es un problema, y no te preocupes, y de nada por todo! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply