Programing question.

Official FreeEMS vanilla firmware development, the heart and soul of the system!
Post Reply
jknightandkarr
TO220 - Visibile
Posts: 5
Joined: Mon May 12, 2014 10:37 am

Programing question.

Post by jknightandkarr »

Is the microcontroller for the FreeEMS and the Motorola 68HC11 happen to the same or atleast similar programing languages? I have the GM 89 5.7 TBI ecm main code and the 89 5.0 TBI calmap data and trying to decode the ecm main code and while its in the language, I don't know the language so its kinda hard to understand what I'm looking at exactly. Or if anyone just happens to already know the details of the gm tbi setup esp the math, details of the ecm board I/O details, since all IC chips been given delco part no's, any help would be appreciated.

Joe
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Programing question.

Post by Fred »

Similar instruction set, but if you're reverse engineering, you're looking at assembly, which FreeEMS mostly does not use.

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply