start-up

Official FreeEMS vanilla firmware development, the heart and soul of the system!
Post Reply
Kuba81
TO220 - Visibile
Posts: 5
Joined: Mon Apr 14, 2014 4:52 pm

start-up

Post by Kuba81 »

Hi
I'm using google translator - sorry something than be understood.

Possessed ms3 but struggling burned and so car is 1year.
He wanted me to run it on your solution, but I have a few questions.
1 Is it possible to run code on the processor mc9s12xep100? - Because I have the 4 pieces clean.
2 Is there a change maps as in the MS table switching.
3 Was that the possibility of changes in the processor output coil?
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: start-up

Post by Fred »

Kuba81 wrote:I'm using google translator - sorry something than be understood.
No problem! :-)
Possessed ms3 but struggling burned and so car is 1year.
You had a difficult time with ms3 and eventually burned it out, and the car has been off the road for 1 year as a result? If so, gutted.
He wanted me to run it on your solution, but I have a few questions.
Who is "he"? Or did you mean "I want to run it on..."? :-)
1 Is it possible to run code on the processor mc9s12xep100? - Because I have the 4 pieces clean.
Not at the moment, sorry, no. It wouldn't be a huge amount of work, but if you're asking, then it's likely not for you to do.
2 Is there a change maps as in the MS table switching.
This is very easy to do, but what is your purpose for switching tables?
3 Was that the possibility of changes in the processor output coil?
I don't understand this at all. Reword in your own language (which is what?) and re-translate for us. :-)

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Kuba81
TO220 - Visibile
Posts: 5
Joined: Mon Apr 14, 2014 4:52 pm

Re: start-up

Post by Kuba81 »

I had a car fired on ms3 but burned processor.

Changing the fuel and ignition maps for LPG

As someone hovers me how to move the coil from the PT to the PA will do it myself.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: start-up

Post by Fred »

PA can not be used at this point, sorry. There is no suitable quality implementation on any branch by any author. Anyone that tells you otherwise is likely a sub-standard developer who you should not trust.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply