Requirements
- XDP512 device (and power supply/comms) with 2kb serial monitor on it and able to load firmware
- 16 to 38+ channels of logic analyser and matching software
Confirmed
- Sean0 1xCPU + 40ch la
- Fred/me 2xCPU + 40ch la
- Preston 2+xCPU + 32ch la
- Spudmn/Aaron 2xCPU + 32ch la
- ToxicGumboot 1xCPU + 32ch la
- Preludelinux 1xCPU + 16ch la
- Andy/Deuce 6xCPU + 32ch la
viewtopic.php?f=37&t=1559 (85usd+p&p)
Also consider this:
http://www.saleae.com/logic16/ (300usd+p&p)
There are others too.
Sean and I will be leading this QC effort for 0.4.0 starting as soon as 0.3.0 is released. You can, if you want, help him with pre-merge testing before then, however please don't let it interfere with testing and QC of mainstream firmware and related tools which must be considered higher priority until 0.3.0 is completed and released.
Again, post here if you qualify and aren't listed, or are listed and don't want to be involved, or are listed and want to confirm, not otherwise.
Not really related to this thread, but close: If you're good with assembly programming then actual formal code reviews of Sean's work will be extremely desirable too. I'll be doing this myself personally, however the more eyes looking over it the better. Only when at least 6 people, including myself, sign it off as suitable for general use will 0.4.0 go out the door. If you'd like to be part of the team that makes sure we stay world class, this is the thread for you :-)
Fred.