View unanswered posts | View active topics It is currently Thu Oct 18, 2018 2:05 am



Reply to topic  [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next
FreeEMS Board ruzki 
Author Message
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15185
Location: Home sweet home!
Boards received! But not assembled :-( Is there BOM documentation? What is the small 8 pin IC? Thanks! :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Fri Feb 21, 2014 11:20 am
Profile WWW
QFP80 - Contributor

Joined: Fri Aug 13, 2010 6:07 am
Posts: 37
I´ll like to have a fully assambled board. I have several M$ cars to upgrade!


Sun Mar 02, 2014 4:09 am
Profile
QFP80 - Contributor
User avatar

Joined: Thu Jun 20, 2013 4:24 pm
Posts: 86
@ Fred ! BOM attached ! the 8pin IC is the CAN driver, the same as on the M$ Board.

@ molak ! note that the Board is in development.
At the moment it is not far enough to be called a real replacement for the M$

I may have a assembled Board for you --> send me an pm ..


Attachments:
File comment: BOM PDF
Free_EMS_Board_ruzki_BOM Blatt1.pdf [42.93 KiB]
Downloaded 209 times
File comment: BOM XLS
Free_EMS_Board_ruzki_BOM.xls [39 KiB]
Downloaded 110 times
Mon Mar 03, 2014 2:40 pm
Profile
QFP80 - Contributor
User avatar

Joined: Thu Jun 20, 2013 4:24 pm
Posts: 86
GNU license will follow when i find some free time for it ! ;)


Tue Mar 04, 2014 12:06 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15185
Location: Home sweet home!
Thanks for doing that :-)

Another thing you might want to do is add a pin to PCB mapping document in ms v3.0 terms. That'd be useful for me hooking it up on the bench too.

See this re licensing: viewtopic.php?f=67&t=2394

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Mar 04, 2014 12:40 pm
Profile WWW
QFP80 - Contributor
User avatar

Joined: Wed Jan 16, 2008 11:09 am
Posts: 99
Location: New Zealand
ruzki,

I'd quite like to asist you with this project if I could.

I have many talents all of which are most likely no use but I realy see potential with
this 40pin based board.

I have 20 or more M$ installs under my belt and more importantly 2 engines run with my TA card based FreeEms ECU. (soon to be 3!)

let me know what I can do to be of assistance!.

Daniel.


Fri Jun 13, 2014 9:50 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15185
Location: Home sweet home!
em_knaps wrote:
let me know what I can do to be of assistance!.

Buy a couple of BOMs for them, I have two of the PCBs, but no parts. You're most welcome to one of them! :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Fri Jun 13, 2014 10:51 am
Profile WWW
QFP80 - Contributor
User avatar

Joined: Thu Jun 20, 2013 4:24 pm
Posts: 86
Daniel sorry i didn't saw your post ..

Daniel wrote:
I'd quite like to asist you with this project if I could.

Damn ! i have to get this license thing done .. :)

Daniel wrote:
let me know what I can do to be of assistance!.

At the moment i´m the only one who ist testing this Boards.
Functionality is limited, further firmware development is needed
If there are 5 or more people who would buy a BOM Kit or fully build Boards i could found Fred a fully build Board.
That would help Fred with development.

My thoughts for the future are maybe to release a 80pin processor Board and also a real 4 cylinder main board.
The 80 pin processor Board would be compatible with a M$ v3.0 Board and the main board would be compatible with a M$-3 Board.
And with a real 4 cylinder board i mean that it has:

4x Injector driver
4x Ignition driver (5v and coil)
1x 2-wire Idle valve driver
1x Boost valve driver
1x Tacho driver
1x Fuel pump driver
2x VR or Hall inputs MAX9926
1x MAP input
1x BARO input
5x Analog inputs (O2,BRV,TPS,CLT,IAT)
1x Spare analog inputs
2x digital inputs
1x Rs-232 communication
1x Bluetooth BTM-222 communication

The goal is to have a board that has nothing unnecessary to make it small as possible


Sun Jun 22, 2014 12:30 pm
Profile
QFP80 - Contributor
User avatar

Joined: Thu Jun 20, 2013 4:24 pm
Posts: 86
Today i added a license and a readme file.
Made some small changes to the PCB, see commit ..

I ordered 10 Board´s today as i now made a license btw. Thank´s to DeuceEFI !!
When they arrive i will open a thread in the sell´s corner.

Georg.


Sat Aug 02, 2014 4:40 pm
Profile
QFP80 - Contributor
User avatar

Joined: Thu Jun 20, 2013 4:24 pm
Posts: 86
New Boards !!
Now with working load jumper and LED.
9 of them will be now up for sale.

Image

Image

Image


Attachments:
IMG_3204.JPG
IMG_3204.JPG [ 89.29 KiB | Viewed 2540 times ]
IMG_3198.JPG
IMG_3198.JPG [ 145.09 KiB | Viewed 2540 times ]
IMG_3189.jpg
IMG_3189.jpg [ 135.61 KiB | Viewed 2540 times ]
Tue Aug 26, 2014 9:23 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 33 posts ]  Go to page Previous  1, 2, 3, 4  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.