Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Sun Feb 23, 2014 10:23 pm
Two more alpha boards are now in my possession 
Different colour scheme this time
Different colour scheme this time
DIYEFI.org Forum
TRUE DIY engine management discussion forum
http://forum.diyefi.org/
Dan's PNP RB25DET R33 Skyline ECU PCB
Page 21 of 22
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Sun Feb 23, 2014 11:08 pm
Sweet! :-)
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Mon Feb 24, 2014 12:52 am
This work is now licensed (similarly to Andy's fine Jaguar project)
https://github.com/dvisser/Nissan-RB25D ... LICENSE.md
https://github.com/dvisser/Nissan-RB25D ... LICENSE.md
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Mon Feb 24, 2014 4:24 am
OEM 76-pin connector removed from OEM PCB successfully
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Mon Feb 24, 2014 5:50 am
Drum roll PLEASE :-)
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Sat Jul 30, 2016 4:51 am
Hmm i must dig all these bits up and send them to someone that wants to play with them.....
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Sat Jul 30, 2016 5:22 am
Pretty please, with sugar on top! There are a couple of RB owning good keen men here. Although I'm told by the other good keen man that my ECU style is totally different because NEO. Not sure.
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Mon Sep 11, 2017 2:22 am
Hey Dan,
Did you ever finish this board? I am hugely interested in your project also living in New Zealand and was wanting to know how you got on and what you did regarding the nissan cas? I have seen Robs car on youtube which looked fantastic also.
A bit of background seeing as this is my first post I have an rb30 s13 which I am running a link g4 storm and have wired and tuned myself, I have made plenty of projects with arduino even an electronic boost controller. I have built and installed and tuned megasquirts as well (ms1) and after seeing your board I am very interested in assembling one to tinker around with and hopefully run on a spare car I have in the shed running a rb20.
Did you ever finish this board? I am hugely interested in your project also living in New Zealand and was wanting to know how you got on and what you did regarding the nissan cas? I have seen Robs car on youtube which looked fantastic also.
A bit of background seeing as this is my first post I have an rb30 s13 which I am running a link g4 storm and have wired and tuned myself, I have made plenty of projects with arduino even an electronic boost controller. I have built and installed and tuned megasquirts as well (ms1) and after seeing your board I am very interested in assembling one to tinker around with and hopefully run on a spare car I have in the shed running a rb20.
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Tue Sep 12, 2017 1:08 pm
Gidday 'hack'n', where abouts in NZ Auckland are you? Keen to talk RB30s, I have one in the garage and a Stagea it's destined for :-)
AFAIK the board never ran successfully. The idea was for Dan to ship them to Rob and I to have a tinker with and see if we could get them working.
It'd be good to see it progressed and in use, that's for sure :-)
AFAIK the board never ran successfully. The idea was for Dan to ship them to Rob and I to have a tinker with and see if we could get them working.
It'd be good to see it progressed and in use, that's for sure :-)
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Posted: Tue Sep 12, 2017 1:14 pm
It definitely would be good to see it finished. I'm in Te awamutu which is just below Hamilton. Here's a video of my 30 in action
https://youtu.be/5yYVgiRLQiA
It seems to be a real easy engine to setup I have a PDF which has most of the ins and outs as a guide for it. I am busting for that new track it meremere to open to give it a go on.
Off topic but has anyone been able to get the Nissan cam angle sensor working with free ems?
https://youtu.be/5yYVgiRLQiA
It seems to be a real easy engine to setup I have a PDF which has most of the ins and outs as a guide for it. I am busting for that new track it meremere to open to give it a go on.
Off topic but has anyone been able to get the Nissan cam angle sensor working with free ems?