Two more alpha boards are now in my possession
Different colour scheme this time
Dan's PNP RB25DET R33 Skyline ECU PCB
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Sweet! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
This work is now licensed (similarly to Andy's fine Jaguar project)
https://github.com/dvisser/Nissan-RB25D ... LICENSE.md
https://github.com/dvisser/Nissan-RB25D ... LICENSE.md
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
OEM 76-pin connector removed from OEM PCB successfully
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Drum roll PLEASE :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Hmm i must dig all these bits up and send them to someone that wants to play with them.....
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Pretty please, with sugar on top! There are a couple of RB owning good keen men here. Although I'm told by the other good keen man that my ECU style is totally different because NEO. Not sure.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Hey Dan,
Did you ever finish this board? I am hugely interested in your project also living in New Zealand and was wanting to know how you got on and what you did regarding the nissan cas? I have seen Robs car on youtube which looked fantastic also.
A bit of background seeing as this is my first post I have an rb30 s13 which I am running a link g4 storm and have wired and tuned myself, I have made plenty of projects with arduino even an electronic boost controller. I have built and installed and tuned megasquirts as well (ms1) and after seeing your board I am very interested in assembling one to tinker around with and hopefully run on a spare car I have in the shed running a rb20.
Did you ever finish this board? I am hugely interested in your project also living in New Zealand and was wanting to know how you got on and what you did regarding the nissan cas? I have seen Robs car on youtube which looked fantastic also.
A bit of background seeing as this is my first post I have an rb30 s13 which I am running a link g4 storm and have wired and tuned myself, I have made plenty of projects with arduino even an electronic boost controller. I have built and installed and tuned megasquirts as well (ms1) and after seeing your board I am very interested in assembling one to tinker around with and hopefully run on a spare car I have in the shed running a rb20.
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
Gidday 'hack'n', where abouts in NZ Auckland are you? Keen to talk RB30s, I have one in the garage and a Stagea it's destined for :-)
AFAIK the board never ran successfully. The idea was for Dan to ship them to Rob and I to have a tinker with and see if we could get them working.
It'd be good to see it progressed and in use, that's for sure :-)
AFAIK the board never ran successfully. The idea was for Dan to ship them to Rob and I to have a tinker with and see if we could get them working.
It'd be good to see it progressed and in use, that's for sure :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Dan's PNP RB25DET R33 Skyline ECU PCB
It definitely would be good to see it finished. I'm in Te awamutu which is just below Hamilton. Here's a video of my 30 in action
https://youtu.be/5yYVgiRLQiA
It seems to be a real easy engine to setup I have a PDF which has most of the ins and outs as a guide for it. I am busting for that new track it meremere to open to give it a go on.
Off topic but has anyone been able to get the Nissan cam angle sensor working with free ems?
https://youtu.be/5yYVgiRLQiA
It seems to be a real easy engine to setup I have a PDF which has most of the ins and outs as a guide for it. I am busting for that new track it meremere to open to give it a go on.
Off topic but has anyone been able to get the Nissan cam angle sensor working with free ems?