Page 11 of 12
Re: Аппаратная часть (Hardware)
Posted: Sat Jun 13, 2015 5:50 pm
by STC
Re: Аппаратная часть (Hardware)
Posted: Wed Nov 04, 2015 4:29 pm
by STC
Схема включения блока SECU-3T(пример) для одновременного или попарно-параллельного впрыска. Высокоомные форсунки, шаговый РХХ.
http://secu-3.org/wordpress/wp-content/ ... epper1.png
Re: Аппаратная часть (Hardware)
Posted: Thu Nov 26, 2015 2:07 pm
by STC
Примеры включения блока SECU-3 Lite
Re: Аппаратная часть (Hardware)
Posted: Mon Jan 18, 2016 4:21 pm
by STC
4-х канальный P&H драйвер низкоомных форсунок
Re: Аппаратная часть (Hardware)
Posted: Sat Jun 25, 2016 12:43 pm
by STC
Re: Аппаратная часть (Hardware)
Posted: Sat Jun 25, 2016 11:12 pm
by Fred
Sorry for posting in English... but:
1) what style of signal does the P&H box take as inputs?
2) what is the pin utilisation, 3 ground, 1 12v, 8 obvious?
3) are your match boxes the same size as the Swedish ones we get here?
4) what diagramming tool do you use?
Cheers! :-)
Re: Аппаратная часть (Hardware)
Posted: Wed Jun 29, 2016 3:22 pm
by STC
Hi Fred,
1) Any type of output (TTL, High-side, low-side, open collector). Optional pull-up and pull-down resistors are provided...
2) 3 pin for ground, 1 pin for +12V supply, 4 inputs, 4 outputs
3) Part number of corresponding box is UNI-S-BOX-070
http://www.kosmodrom.com.ua/pdf/UNI-S-BOX.pdf
4) Old version of PCAD
Re: Аппаратная часть (Hardware)
Posted: Sat Sep 03, 2016 10:08 am
by STC
Several photos of the new EMS unit - SECU-3i
Re: Аппаратная часть (Hardware)
Posted: Mon Jun 24, 2019 12:58 pm
by STC
Top board of SECU-3i with an embedded 5-channel peak and hold injector driver. This board is on testing now. PCB has 4 layers, SMD 0805 and 1206 components are used.
Re: Аппаратная часть (Hardware)
Posted: Sun Jul 07, 2019 3:31 am
by ToxicGumbo
Очень хорошо! Safe to say that’s a third-party Bluetooth adapter on the top right?