Building a Jaguar board? Start a build thread here :-)

Andy's GM DIS centric hardware design! Also works as a fuel controller for EDIS and distributor applications.
Post Reply
User avatar
DeuceEFI
LQFP144 - On Top Of The Game
Posts: 578
Joined: Thu Feb 25, 2010 3:57 am
Location: Gosport, IN USA
Contact:

Building a Jaguar board? Start a build thread here :-)

Post by DeuceEFI »

If you are building a Jaguar board from either a bare PCB or from a kit you have purchased from me, please post a thread in this section so that way we can help you along your build as there are component choices that need to be made depending on your setup. For example the RPM input circuit components are different for VR inputs versus Hall/Digital/Opto inputs and some components in those circuits are not even installed at all. So please help us by letting us help you with your build here on the forum. :-)
Once you've posted your thread, post here linking to it with a short description and it'll get added to the above list.

Thanks,
Last edited by Fred on Mon Jan 27, 2014 10:30 am, edited 4 times in total.
Reason: Added some text to Andy's post.
User avatar
DeuceEFI
LQFP144 - On Top Of The Game
Posts: 578
Joined: Thu Feb 25, 2010 3:57 am
Location: Gosport, IN USA
Contact:

Re: Building a Jaguar board? Start a build thread here :-)

Post by DeuceEFI »

Place holder for Andy's Jaguar builds:
A2 SN #1 (first start on S10)
A3 SN #1 (first start on the Deuce and still connected)
0.4-alpha SN #1 (was on the S10)
0.6-alpha builds of SN #1 (currently on the S10) and #2 (bare PCB on my desk)
Last edited by DeuceEFI on Wed Nov 13, 2013 5:18 am, edited 1 time in total.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Building a Jaguar board? Start a build thread here :-)

Post by Fred »

My old A3 build: viewtopic.php?f=67&t=1697

My new 0.6-alpha build: viewtopic.php?f=67&t=2388

Place holder for my future 0.6-alpha build.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
Dan
LQFP144 - On Top Of The Game
Posts: 1204
Joined: Tue Mar 02, 2010 2:33 pm
Location: Australia

Re: Building a Jaguar board? Start a build thread here :-)

Post by Dan »

Place holder for my future 0.6-alpha build :-)
Ruffcut
TO220 - Visibile
Posts: 9
Joined: Tue May 06, 2014 1:29 pm

Re: Building a Jaguar board? Start a build thread here :-)

Post by Ruffcut »

Hi,

My build thread is here viewtopic.php?f=67&t=2483.

Thanks

Ruffcut
Post Reply