Page 3 of 4

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 2:01 am
by Fred
Even something like Maplin should be able to supply this.

http://www.maplin.co.uk/p/resin-dipped- ... itor-ra43w

At 44p, it won't break the bank! ;-)

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 9:17 am
by mikehudsonuk
thanks Fred - just tried to checkout at digikey and shipping was indeed £12!

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 10:42 am
by ivan141
I have shitloads of passive components in my basement.. I'll have a look if I can find some 6.8nF caps, might be a lot cheaper for any european guys in need of a few since they fit envelopes just fine.

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 10:44 am
by volvoguy
I used the 'ask a question' function to ask Maplin a couple of days ago whether those are C0G NP0 but they haven't answered yet. Andy mentioned that larger problems than those caused by the capacitance being out by an order of magnitude could be introduced unless I stuck to the values he gave, I take serious dev comments seriously :)

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 7:49 pm
by Fred
X7R will be just fine, I promise. :-p

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Tue Aug 05, 2014 8:32 pm
by whizzo944
Thank you Fred :lol:

Dave.

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Fri Aug 08, 2014 12:49 am
by ToxicGumbo
I lied and haven't done anything to my Jaguar except drive it around blindly on pedestrian streets and highways.

That is all.

-Jeff

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Thu Oct 23, 2014 4:31 am
by ToxicGumbo
Months later, C7 replaced.


-Jeff

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Thu Jan 08, 2015 5:27 pm
by pishta
C7 ordered...thanks.

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Posted: Mon Jan 19, 2015 1:46 am
by sim
I've finally fixed mine.

No difference observed after a few drives, which is good, because it means I didn't screw it up.

Thanks,