DIYEFI.org Forum

noted

Noted.
Thanks for the diligence.
-Matt

Thanks for the transparency and solid concern about this. I'll swap out my cap tomorrow after returning from the mountains.


-Jeff

Hello,
DeuceEFI PM'ed me about the C7 capacitor value error, I will be updating my board today. Thanks for the heads-up.
As an aside, I couldn't find a BOM on Github, I am just building my board by looking at the schematics.

TIA,

Dave.

Acknowledged.. may I insert a "I told you so" here as I pointed this out when Fred was in Canada. At the time I could offer no technical I reason, I just thought it was an inconsistency in the bom.

AncientGeek wrote:may I insert a 8-) "I told you so" here as I pointed this out when Fred was in Canada. At the time I could offer no technical I reason, I just thought it was an inconsistency in the bom.

You may, and I'll point out that I replied with the correct answer at the time. I won't say more than this, though.

Nice catch, Mines still on the workbench(!) , no blood-no foul!

noting my acknowledgement
Also; the same part number Andy linked to earlier in the thread for the replacement can also be found at digikey.co.uk, for those in the UK.

Almost any 6.8nF cap that fits the spot will work. Tighter tolerance is better, but not really required. Mono-cermaic multilayer disks are my favourite.

Digikey will sell it to you in the UK but they don't have any UK stock so it's about a tenner to get it to your door.