IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Error

Andy's GM DIS centric hardware design! Also works as a fuel controller for EDIS and distributor applications.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by Fred »

Even something like Maplin should be able to supply this.

http://www.maplin.co.uk/p/resin-dipped- ... itor-ra43w

At 44p, it won't break the bank! ;-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
mikehudsonuk
TO220 - Visibile
Posts: 8
Joined: Tue Sep 03, 2013 8:11 am

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by mikehudsonuk »

thanks Fred - just tried to checkout at digikey and shipping was indeed £12!
ivan141
LQFP112 - Up with the play
Posts: 148
Joined: Sat Sep 29, 2012 9:16 pm
Location: Rotterdam, the Netherlands

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by ivan141 »

I have shitloads of passive components in my basement.. I'll have a look if I can find some 6.8nF caps, might be a lot cheaper for any european guys in need of a few since they fit envelopes just fine.
FABRICA MI DIEM, PVNC!
volvoguy
QFP80 - Contributor
Posts: 63
Joined: Sun Jan 22, 2012 10:52 pm
Location: Scotland

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by volvoguy »

I used the 'ask a question' function to ask Maplin a couple of days ago whether those are C0G NP0 but they haven't answered yet. Andy mentioned that larger problems than those caused by the capacitance being out by an order of magnitude could be introduced unless I stuck to the values he gave, I take serious dev comments seriously :)
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by Fred »

X7R will be just fine, I promise. :-p
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
whizzo944
QFP80 - Contributor
Posts: 53
Joined: Sun Mar 27, 2011 9:35 am
Location: Durham, U.K.

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by whizzo944 »

Thank you Fred :lol:

Dave.
User avatar
ToxicGumbo
LQFP144 - On Top Of The Game
Posts: 474
Joined: Tue Jan 03, 2012 8:37 pm
Location: Manhattan, KS. USA

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by ToxicGumbo »

I lied and haven't done anything to my Jaguar except drive it around blindly on pedestrian streets and highways.

That is all.

-Jeff
User avatar
ToxicGumbo
LQFP144 - On Top Of The Game
Posts: 474
Joined: Tue Jan 03, 2012 8:37 pm
Location: Manhattan, KS. USA

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by ToxicGumbo »

Months later, C7 replaced.


-Jeff
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by pishta »

C7 ordered...thanks.
User avatar
sim
LQFP112 - Up with the play
Posts: 112
Joined: Thu Jun 02, 2011 8:17 pm

Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro

Post by sim »

I've finally fixed mine.

No difference observed after a few drives, which is good, because it means I didn't screw it up.

Thanks,
<@TekniQue> but in the end, it's code that makes a computer useful
Post Reply