IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Error
-
- TO92 - Vaguely active
- Posts: 3
- Joined: Wed May 07, 2014 5:53 pm
- Location: Saskatchewan, Canada
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Noted.
Thanks for the diligence.
-Matt
Thanks for the diligence.
-Matt
- ToxicGumbo
- LQFP144 - On Top Of The Game
- Posts: 474
- Joined: Tue Jan 03, 2012 8:37 pm
- Location: Manhattan, KS. USA
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Thanks for the transparency and solid concern about this. I'll swap out my cap tomorrow after returning from the mountains.
-Jeff
-Jeff
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Hello,
DeuceEFI PM'ed me about the C7 capacitor value error, I will be updating my board today. Thanks for the heads-up.
As an aside, I couldn't find a BOM on Github, I am just building my board by looking at the schematics.
TIA,
Dave.
DeuceEFI PM'ed me about the C7 capacitor value error, I will be updating my board today. Thanks for the heads-up.
As an aside, I couldn't find a BOM on Github, I am just building my board by looking at the schematics.
TIA,
Dave.
-
- QFP80 - Contributor
- Posts: 67
- Joined: Thu Jan 12, 2012 12:54 pm
- Location: South Shithole
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Acknowledged.. may I insert a "I told you so" here as I pointed this out when Fred was in Canada. At the time I could offer no technical I reason, I just thought it was an inconsistency in the bom.
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
You may, and I'll point out that I replied with the correct answer at the time. I won't say more than this, though.AncientGeek wrote:may I insert a 8-) "I told you so" here as I pointed this out when Fred was in Canada. At the time I could offer no technical I reason, I just thought it was an inconsistency in the bom.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Nice catch, Mines still on the workbench(!) , no blood-no foul!
-
- TO220 - Visibile
- Posts: 8
- Joined: Tue Sep 03, 2013 8:11 am
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
noting my acknowledgement
Also; the same part number Andy linked to earlier in the thread for the replacement can also be found at digikey.co.uk, for those in the UK.
Also; the same part number Andy linked to earlier in the thread for the replacement can also be found at digikey.co.uk, for those in the UK.
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Almost any 6.8nF cap that fits the spot will work. Tighter tolerance is better, but not really required. Mono-cermaic multilayer disks are my favourite.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: IMPORTANT Jaguar A3, 0.4, 0.6 & 0.7 BOM & Parts Kit Erro
Digikey will sell it to you in the UK but they don't have any UK stock so it's about a tenner to get it to your door.