Neil's belated and painfully slow 0.4 alpha build

Andy's GM DIS centric hardware design! Also works as a fuel controller for EDIS and distributor applications.
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: Neil's belated and painfully slow 0.4 alpha build

Post by pishta »

Subscribed for EDIS progress and moral support!
AncientGeek
QFP80 - Contributor
Posts: 67
Joined: Thu Jan 12, 2012 12:54 pm
Location: South Shithole

Re: Neil's belated and painfully slow 0.4 alpha build

Post by AncientGeek »

Thanks for moral support Pishta, a bit of progress after being distracted by business travel and a reluctant wide band. Tested serial access, verified logging, stopped and restarted logging, requested firmware version (benchtest), that sort of thing.

BRV, IAT, and AAT circuits built. The latter 2 required quite a bit of patching on the 0.4. Needs a good dip in alcohol now (the board, I mean). Pics to follow.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Neil's belated and painfully slow 0.4 alpha build

Post by Fred »

What is AAT? Did you mean AAP? Why would IAT need any patching? Progress is good! :-D
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
AncientGeek
QFP80 - Contributor
Posts: 67
Joined: Thu Jan 12, 2012 12:54 pm
Location: South Shithole

Re: Neil's belated and painfully slow 0.4 alpha build

Post by AncientGeek »

Oops yes I meant MAP and AAP. Haven't got to IAT yet.
AncientGeek
QFP80 - Contributor
Posts: 67
Joined: Thu Jan 12, 2012 12:54 pm
Location: South Shithole

Re: Neil's belated and painfully slow 0.4 alpha build

Post by AncientGeek »

Pics as promised
Map under construction
Map under construction
Attachments
map and aap with patches
map and aap with patches
AncientGeek
QFP80 - Contributor
Posts: 67
Joined: Thu Jan 12, 2012 12:54 pm
Location: South Shithole

Re: Neil's belated and painfully slow 0.4 alpha build

Post by AncientGeek »

nearly complete
almost_there.jpg
old style stim attached
stim.jpg
testing inputs
emstudio.jpg
rpm still to be decided as I want to do edis first (for academic reasons only)
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: Neil's belated and painfully slow 0.4 alpha build

Post by pishta »

AncientGeek wrote:I want to do edis first (for academic reasons only)
Im with you, Greek!
AncientGeek
QFP80 - Contributor
Posts: 67
Joined: Thu Jan 12, 2012 12:54 pm
Location: South Shithole

Re: Neil's belated and painfully slow 0.4 alpha build

Post by AncientGeek »

Thank you prishta. :lol:

I'd like to share with you a revelation I had during my time here, Mr Anderson.
It came to me when I tried to classify the Jag inputs and outputs.
I realised that 12V-OUTPUT is not actually an output but an input for the outputs!
Last edited by AncientGeek on Sat Apr 19, 2014 9:36 am, edited 1 time in total.
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: Neil's belated and painfully slow 0.4 alpha build

Post by pishta »

AncientGeek wrote: I realised that 12V-OUTPUT is not actually an output but an input for the outputs!
Can you elaborate? Is this a 0.4 issue or is it carried over to 0.6 too?
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Neil's belated and painfully slow 0.4 alpha build

Post by Fred »

Purely naming.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply