Page 1 of 1

Building a Jaguar board? Start a build thread here :-)

Posted: Wed Nov 13, 2013 5:00 am
by DeuceEFI
If you are building a Jaguar board from either a bare PCB or from a kit you have purchased from me, please post a thread in this section so that way we can help you along your build as there are component choices that need to be made depending on your setup. For example the RPM input circuit components are different for VR inputs versus Hall/Digital/Opto inputs and some components in those circuits are not even installed at all. So please help us by letting us help you with your build here on the forum. :-)
Once you've posted your thread, post here linking to it with a short description and it'll get added to the above list.

Thanks,

Re: Building a Jaguar board? Start a build thread here :-)

Posted: Wed Nov 13, 2013 5:08 am
by DeuceEFI
Place holder for Andy's Jaguar builds:
A2 SN #1 (first start on S10)
A3 SN #1 (first start on the Deuce and still connected)
0.4-alpha SN #1 (was on the S10)
0.6-alpha builds of SN #1 (currently on the S10) and #2 (bare PCB on my desk)

Re: Building a Jaguar board? Start a build thread here :-)

Posted: Wed Nov 13, 2013 5:11 am
by Fred
My old A3 build: viewtopic.php?f=67&t=1697

My new 0.6-alpha build: viewtopic.php?f=67&t=2388

Place holder for my future 0.6-alpha build.

Re: Building a Jaguar board? Start a build thread here :-)

Posted: Wed Nov 13, 2013 6:29 am
by Dan
Place holder for my future 0.6-alpha build :-)

Re: Building a Jaguar board? Start a build thread here :-)

Posted: Thu Jul 24, 2014 7:36 am
by Ruffcut
Hi,

My build thread is here viewtopic.php?f=67&t=2483.

Thanks

Ruffcut