Hentai's Project Ditch-MS2

Post by **Fred** » Mon Sep 03, 2012 1:45 pm

Hentai has, very kindly, been sponsored a Jaguar board by Andy: viewtopic.php?f=41&t=1847

This thread will document his hackage and process in making his new shiny hardware work on his Miata!

Take it away, Hentai! :-)

Fred.

Hentai · Post by **Hentai** » Thu Sep 20, 2012 6:23 am

http://www.youtube.com/watch?v=sq7oTsJR ... e=youtu.be

Just mentioning my attack strategy.

Post by **Fred** » Thu Sep 20, 2012 8:15 am

Awesome! :-)

Post by **DeuceEFI** » Thu Sep 20, 2012 1:12 pm

Sounds like you are on the right path

Post by **Dan** » Thu Sep 20, 2012 1:44 pm

sweet! the path has been set!

Hentai · Post by **Hentai** » Thu Sep 20, 2012 5:41 pm

http://youtu.be/uYJmzI6hn_Y
psu

Post by **Fred** » Thu Sep 20, 2012 7:59 pm

Loving the video build diary! :-)

Make sure you have the output of the reg disconnected from the CPU before testing it.

Post by **Fred** » Thu Sep 20, 2012 8:00 pm

Also, use a 9v or current limit your 12v with a resistor in case of fault.

Hentai · Post by **Hentai** » Fri Sep 21, 2012 12:20 am

http://youtu.be/vPyuJTlaGBo
testing PSU output

Hentai · Post by **Hentai** » Fri Sep 21, 2012 7:18 am

http://youtu.be/12oA_4ZQyGo

I tried using EMStudio with no success. Got to get with deuce or fred later.
I take it the board doesn't have firmware on it and thats why emstudio can't read it and gets stopped and fails.
I bet if I knew how I could test better communications.

DIYEFI.org Forum

Hentai's Project Ditch-MS2

Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2

Re: Hentai's Project Ditch-MS2