Look what arrived in the mail today! (thanks Kennybug!)
Stay tuned!
Dan's Jaguar PCB Build
Re: Dan's Jaguar PCB Build
Components to complete the necessary circuits to enable me to communicate with this beast have been ordered!
good times ahead!
good times ahead!
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Dan's Jaguar PCB Build
Cool
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
Re: Dan's Jaguar PCB Build
CPU and pressure sensor arrived today. Rest of parts will come next week.
Will solder the CPU on tonight if I get a spare moment!
Will solder the CPU on tonight if I get a spare moment!
Re: Dan's Jaguar PCB Build
Soldered in CPU IC tonight!
Turned out a treat! (phone pics are shitty quality, my apologies)
More to come in the next few days! Stay tuned!
Turned out a treat! (phone pics are shitty quality, my apologies)
More to come in the next few days! Stay tuned!
Re: Dan's Jaguar PCB Build
More components arrived today.
All I am waiting on are 47uF caps, 6.8nF caps, 680pF caps, 16Mhz crystal and the HCPL-061A opto IC's.
Should be here by the end of this week!
All I am waiting on are 47uF caps, 6.8nF caps, 680pF caps, 16Mhz crystal and the HCPL-061A opto IC's.
Should be here by the end of this week!
Re: Dan's Jaguar PCB Build
soldering currently in progress...... expect pics to follow shortly
Re: Dan's Jaguar PCB Build
its ALIVE!!!! MWAHAHAHAHAHAHA!!!!
Firmware now runs on my Jag PCB!
BOO - YA !
Firmware now runs on my Jag PCB!
BOO - YA !