Building Jaguar A3 board Serial #1 - Comments Thread
Re: Building Jaguar A3 board Serial #1 - Comments Thread
Good call re the crystal cap size (I had noticed that too but hadn't piped up) and freezer/oven testing. +1
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Building Jaguar A3 board Serial #1 - Comments Thread
+1 for freezer and oven tests!
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Building Jaguar A3 board Serial #1 - Comments Thread
I will test the caps again now that I solved the underlying issues (a few cold solder joints elsewhere around the MCU) that prevented the 20pF caps from working.
Also will test the freezer/warm oven scenarios to see if those temperature extremes cause a failure.
Also will test the freezer/warm oven scenarios to see if those temperature extremes cause a failure.
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com