Fred wrote:About the Pxx, if it's not written on the board, ....The board should mostly document itself, especially at a user/connection/configuration level.
Seems to be a disconnect between the actual pcb and the schematic.E4ODnut wrote:"Pxx" means nothing to anyone??
I'm following the Jaguar schematic. Pxx denotes conn-1, a single pin connector. I can't seem to find any direct reference, but from examining the PCB file and the board itself it looks to me like P32 is labled "ign-12v" on the silk screen.
It took me a bit of time to review what E4ODnut had said because it still looks like the "find" function in a pdf still doesn't work in a Kicad generated pdf.
But it seems that there is a "P(pad?)32" on the schematic that is identified (maybe) by an "Ign-12V" label near a pad on the pcb.
So, I assume that "P32" / "Ign-12V" is wired to a keyswitch sourced 12V?
BTW E4ODnut, I think that it is great that you are identifying issues that may be unclear to someone who is "fresh" to the diyefi.org world.
At work, we call these issues "opportunities for improvement".
Thanks,
TonyS.