View unanswered posts | View active topics It is currently Fri Dec 15, 2017 1:14 pm



Reply to topic  [ 48 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Ayuda con firmware 
Author Message
LQFP144 - On Top Of The Game
User avatar

Joined: Tue Jan 03, 2012 8:37 pm
Posts: 434
Location: Manhattan, KS. USA
Someone correct me if I'm wrong, but doesn't the only FreeEMS compatible version of EMStudio require Qt4?


-Jeff

_________________
FreeEMS vehicle #23: 2003 Toyota "Toxic" Tacoma
Build page: http://forum.diyefi.org/viewtopic.php?f=3&t=1635)


Mon Jun 27, 2016 3:03 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14913
Location: Home sweet home!
ToxicGumbo wrote:
Someone correct me if I'm wrong, but doesn't the only FreeEMS compatible version of EMStudio require Qt4?

You're not wrong, tu eres correcto! :-D

Aldo, you're getting the tuning software from the wrong place with the wrong instructions. Sorry about that. It's abandonware, really. The one I gently maintain a little is here and here:

https://github.com/fredcooke/emstudio and https://github.com/fredcooke/emstune-freeems

Clone with 'git clone https://github.com/fredcooke/emstudio.git'

Then follow the instructions: https://github.com/fredcooke/emstudio/b ... /README.md

"sudo apt-get install build-essential libqt4-dev libqt4-opengl-dev libqt4-opengl-dev qt4-qmake libqwt-dev libqt4-declarative libqjson-dev freeglut3-dev pkg-config"

cd emstudio

git clone https://github.com/fredcooke/emstune-freeems.git plugins/freeems

qmake -r

make

cd core

./emstudio

Then you should be in luck. Not sure what half of those Debian Spanish messages mean, but you may have to clean up some of what you did by removing things (without removing stuff that was already there and is needed).

Perdoneme para Ingles!

Fredito.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Mon Jun 27, 2016 3:56 am
Profile WWW
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
OK
Now i have the tunning software installed :o
tanks Fred
but.. i think i need to find how to install the ftdi driver, because i plug the usb cable the 2 led of the ftdi blinks but the ems studio cant connect


Tue Jun 28, 2016 4:43 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14913
Location: Home sweet home!
ftdi driver is built in, are you in dialout group? A snippet from the code of one of my apps:

"Please add your user to the 'dialout' group by replacing <username>"
"sudo adduser <username> dialout"

After this you have to fully log out of the UI and log back in so that the group applies to your user in the terminal you launch it from.

Or you could reboot, if you prefer.

Check groups with, surprise, 'groups':

Code:
fred@falcon:~$ groups
fred lp dialout cdrom floppy sudo audio dip video plugdev netdev scanner bluetooth systemd-network


Check device with:

ls -al /dev/ttyUSB*

before and after plugging it to see it show up :-)

Getting close! :-D

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Jun 28, 2016 4:55 am
Profile WWW
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
lsusb shows
Bus 002 Device 018: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC


Tue Jun 28, 2016 4:58 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14913
Location: Home sweet home!
One thing, have you loaded some firmware to it for EMStudio to talk to? If not, you'll need to do that. My suggestion, go and get FUCT! :-) If getting FUCT is too hard, let me know and I'll furnish you with UL :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Jun 28, 2016 4:59 am
Profile WWW
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
hi
./build.py install_dependencies

Cleaning up...
------------------------------------------------------------
BUILD FAILED - Unable to install batch dependencies.
------------------------------------------------------------
Build finished at 2016-06-28 19:48:06
Build took 5 seconds (5396 ms)

:?:


Wed Jun 29, 2016 1:51 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14913
Location: Home sweet home!
That command is not included in the instructions! https://github.com/MrOnion/fuct These are, though:

  1. sudo apt-get install python-pip
  2. sudo pip install --upgrade pybuilder colorlog pyserial futures
  3. pyb
  4. cd target/dist/fuct-<version>
  5. python setup.py install
  6. fuctloader -s /dev/tty.usbserial load MyFirmware.S19

Something like that! :-)

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Wed Jun 29, 2016 4:25 am
Profile WWW
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
HI
in 3 step


aldo@aspire-AO725:~$ sudo apt-get install python-pip
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias
Leyendo la información de estado... Hecho
python-pip ya está en su versión más reciente.
Los paquetes indicados a continuación se instalaron de forma automática y ya no son necesarios.
thunderbird-globalmenu gir1.2-ubuntuoneui-3.0 firefox-globalmenu libubuntuoneui-3.0-1
Utilice «apt-get autoremove» para eliminarlos.
0 actualizados, 0 se instalarán, 0 para eliminar y 241 no actualizados.
aldo@aspire-AO725:~$ pip install --upgrade pybuilder colorlog pyserial futures
/usr/local/lib/python2.7/dist-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:318: SNIMissingWarning: An HTTPS request has been made, but the SNI (Subject Name Indication) extension to TLS is not available on this platform. This may cause the server to present an incorrect TLS certificate, which can cause validation failures. You can upgrade to a newer version of Python to solve this. For more information, see https://urllib3.readthedocs.org/en/late ... ingwarning.
SNIMissingWarning
/usr/local/lib/python2.7/dist-packages/pip/_vendor/requests/packages/urllib3/util/ssl_.py:122: InsecurePlatformWarning: A true SSLContext object is not available. This prevents urllib3 from configuring SSL appropriately and may cause certain SSL connections to fail. You can upgrade to a newer version of Python to solve this. For more information, see https://urllib3.readthedocs.org/en/late ... ormwarning.
InsecurePlatformWarning
Requirement already up-to-date: pybuilder in /usr/local/lib/python2.7/dist-packages
Requirement already up-to-date: colorlog in /usr/local/lib/python2.7/dist-packages
Requirement already up-to-date: pyserial in /usr/local/lib/python2.7/dist-packages
Requirement already up-to-date: futures in /usr/local/lib/python2.7/dist-packages
Requirement already up-to-date: pip>=7.0 in /usr/local/lib/python2.7/dist-packages (from pybuilder)
Requirement already up-to-date: tblib in /usr/local/lib/python2.7/dist-packages (from pybuilder)
Requirement already up-to-date: wheel in /usr/local/lib/python2.7/dist-packages (from pybuilder)
aldo@aspire-AO725:~$ pyb
PyBuilder version 0.11.9.dev20160616212308
Build started at 2016-06-29 12:38:08
------------------------------------------------------------
------------------------------------------------------------
BUILD FAILED - Project directory does not contain descriptor file: /home/aldo/build.py
------------------------------------------------------------
Build finished at 2016-06-29 12:38:08
Build took 0 seconds (1 ms)
aldo@aspire-AO725:~$


Wed Jun 29, 2016 6:48 pm
Profile
QFP80 - Contributor

Joined: Fri Apr 04, 2008 1:26 am
Posts: 31
[ERROR] Test has error: plugins.python.distutils_plugin_tests.InstallDependenciesTest.test_should_return_single_dependency_string_with_version
Traceback (most recent call last):
File "/home/aspire/pybuilder/src/unittest/python/plugins/python/distutils_plugin_tests.py", line 97, in test_should_return_single_dependency_string_with_version
self.project.depends_on("spam", "0.7")
File "/usr/local/lib/python2.7/dist-packages/pybuilder/core.py", line 407, in depends_on
self._install_dependencies.add(Dependency(name, version, url))
File "/usr/local/lib/python2.7/dist-packages/pybuilder/core.py", line 236, in __init__
version = ">=" + str(Version(version))
File "/usr/local/lib/python2.7/dist-packages/pip/_vendor/packaging/version.py", line 210, in __init__
match.group("pre_n"),
TypeError: 'NoneType' object is not callable

------------------------------------------------------------
BUILD FAILED - There were 15 error(s) and 0 failure(s) in unit tests
------------------------------------------------------------


Wed Jun 29, 2016 7:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 48 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.