ms2 extra ignition

Discuss MegaSquirt, VEMS and other non-free hardware and software here.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ms2 extra ignition

Post by Fred »

jsmcortina wrote:It had been reported a little while back that there was an issue at higher rpms if a spark output "landed" on a tooth edge. The CPU was busy handling the tach-in interrupt and the spark was delayed. At the time we didn't have a solution. Recently Ken came up with an idea to reduce the effect which I have implemented. My bench testing at ~8000rpm shows a possible worst case delay before of ~3degress which now looks to be <1degree. However...

PLEASE PROCEED WITH CAUTION! This is a small but significant change to the core spark output code. If you observe any oddities during testing, get off the throttle immediately !
http://msextra.com/forums/viewtopic.php?f=91&t=44952

Retest! :-)

IF you can be bothered! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
Dan
LQFP144 - On Top Of The Game
Posts: 1204
Joined: Tue Mar 02, 2010 2:33 pm
Location: Australia

Re: ms2 extra ignition

Post by Dan »

what junk. why bother with this inferior EMS in the first place.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ms2 extra ignition

Post by Fred »

To replace MicroLebs? :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
EssEss
LQFP112 - Up with the play
Posts: 244
Joined: Thu Sep 10, 2009 9:23 am
Location: Dayton, OH

Re: ms2 extra ignition

Post by EssEss »

My dev board for this platform is long gone.
One of these days, after my move in the next month, I swear FreeEMS is up for some testing/exploration.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ms2 extra ignition

Post by Fred »

Oh fuck! :-o
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: ms2 extra ignition

Post by Fred »

Can you start with comms? :lol:
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply