Innovate LC-1 problem

Discuss MegaSquirt, VEMS and other non-free hardware and software here.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Innovate LC-1 problem

Post by Fred »

OK! If that's true, then I concur with your advice! :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
wrcbfmr
TO220 - Visibile
Posts: 10
Joined: Mon Nov 08, 2010 9:13 am

Re: Innovate LC-1 problem

Post by wrcbfmr »

ugh, ffs fred, yes OUTPUT TO ECU, thought that was pretty clear... go get a job and stop being so anal :-P cheers dan, yeah i need to go hook it up to the lappy (sorry fred, laptop) and have a look whats going on on that side of things.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Innovate LC-1 problem

Post by Fred »

It's not clear unless it's clear. Would you rather someone less anal had built that box for you? :-p And refer to my first post, in which I told you to hook up the software to it and check everything ;-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
wrcbfmr
TO220 - Visibile
Posts: 10
Joined: Mon Nov 08, 2010 9:13 am

Re: Innovate LC-1 problem

Post by wrcbfmr »

lol that was the plan but im only home on the weekends so shall do that tomorrow and have a look. possible the sensor needs recalibrating for some reason or other, soon find out
User avatar
m2cupcar
LQFP112 - Up with the play
Posts: 139
Joined: Thu Feb 07, 2008 9:04 pm

Re: Innovate LC-1 problem

Post by m2cupcar »

Was this resolved? Have the same problem with an Innovate SCG-1 controller and LSU 4.9 sensor.
90 Miata | 302rwhp @ 6450rpm | 281rwftlbs @ 4800rpm | FE-dohc 2.0L turbo
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Innovate LC-1 problem

Post by Fred »

Dan is far away on a boat, and other Dan doesn't visit the forum anymore, so I doubt you will get a response. Just FYI.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply