Self learning (I need guideline)

Discuss MegaSquirt, VEMS and other non-free hardware and software here.
User avatar
Fred
Moderator
Posts: 15433
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Self learning (I need guideline)

Post by Fred »

Ideally need more than that, coolant and air temperature sensor details, TPS min and max values, wideband profile, MAP sensor model/range/extremes, etc.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
amatt
QFP80 - Contributor
Posts: 46
Joined: Mon Oct 08, 2018 7:12 am

Re: Self learning (I need guideline)

Post by amatt »

I dig out some setting in my TS running with MS2 for this engine.

TPS:-
Close adc count- 205
Full adc count- 999

Coolant:-
-40C - 100490 ohm
30C - 1875 ohm
99C - 125 ohm

Bias resistor value - 2490 ohm

IAT:-

same value as coolant


Map sensor:- MPX6250A

Engine: nearly 1800cc

Injector size: 210cc

Trigger angle offset: -5 (this value is in TS, if it can be figure it out in Emstudio, please ignore)

Wideband: Innovate MTX, but not attach yet. Just view at it gauge, and do tuning.

Thanks.

Amatt

PS: Should I start a new topic?
amatt
QFP80 - Contributor
Posts: 46
Joined: Mon Oct 08, 2018 7:12 am

Re: Self learning (I need guideline)

Post by amatt »

Fred wrote:No, those windows tools are way out of date and I think not compatible with latest source.

You may be able to use that image and get a running setup, but there are newer firmware versions available that I could build for you that will give you a better experience.

EMStudio, Linux only, limited availability, just a bunch of bug fixes and tweaks to suit latest firmware. EMStudio without the fixes is pretty buggy.

What OS are you on?
Any update? pre-compile S19?
User avatar
Fred
Moderator
Posts: 15433
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Self learning (I need guideline)

Post by Fred »

Sorry man, life's been kicking my arse recently in 3 different ways.

New topic, yes, start a thread about your car in users' rides and post some pics and details of the car and engine and sensors etc. And we'll go from there.

Link back to the first post where you started to get serious in this thread, from the new one, and from this one to the new one, too.

Cheers!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply