Even Teeth With Single Cam Sync
Posted: Mon Mar 21, 2011 2:06 am
This decoder is a general and customisable base code now. Current configurations support the R1 engine and most toyota 24/2 setups with the following stipulations:
Pros:
If you require a configuration that isn't in the following list, paste the details here, with supporting evidence and I will add it very quickly for you (15 minutes if your information is good).
Pros:
- Simple hardware setup, 2 VR inputs, (G1 OR G2) AND NE (just wire it up to a stock Puma)
- COP/CNP/Sequential full engine cycle synchronisation
- Slower to obtain synchronisation and to start running
- Doesn't use all of the information available
If you require a configuration that isn't in the following list, paste the details here, with supporting evidence and I will add it very quickly for you (15 minutes if your information is good).
- 12 on crank or 24 on cam + 1 on cam (supports Toyota stuff and Yoshifab CAS solutions)
- 8 on crank or 16 on cam + 1 on cam (supports the R1 and possibly others)