View unanswered posts | View active topics It is currently Wed Sep 20, 2017 10:13 am



Reply to topic  [ 3 posts ] 
Fred's 1983 KP60 Toyota Starlet! 39th! 
Author Message
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14771
Location: Home sweet home!
Well, this afternoon we set about debugging why we failed on our mission to drive 1000km+ back from the South Island on a fresh install of FreeEMS. It turns out that you need to know what your coils are to wire them up correctly... so, now that the ignitors have been removed and the active coils hooked up correctly, we can happily say that the car ran on FreeEMS control! We dialed in the timing running the factory ignition and then shut it down, swapped the leads over, disabled the factory coil, and fired it right back up. Easiest most trouble-free first start ever! 39th is mine :-D

Many thanks to Dave for coils/leads, John for assistance, Rob for assistance and companionship, Ned for coil docs, Cam for engineering assistance and fixing the wiring to be correct, Wife for tolerating the fleet, etc.

Youtubes to come tomorrow after sorting out the lack of vacuum and dialing in the base timing more precisely and fixing a loose fastener on the engine front cover. For now, here's a grossly oversized photo to give the thread a little colour!



Image



Users rides build thread: viewtopic.php?f=3&t=2654

Comments, commiserations, congratulations, and abuse all welcome! :-D

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sat Feb 20, 2016 9:03 am
Profile WWW
LQFP112 - Up with the play

Joined: Fri Sep 16, 2011 8:37 pm
Posts: 146
Location: New Zealand
Congrats Fred.
KP FAIL success! Thanks for having me along on the trip.
Fun little car with an exciting future ahead.


Sun Feb 21, 2016 9:06 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 14771
Location: Home sweet home!
Cheers! Sorry I didn't wait till you were around to sort out the issues.

I'll call it a full success, and scrape FAIL off of the glass, when the vacuum source works and I can leave the can coil and dizzy in the garage ;-)

You're welcome re coming on the trip, was a good team effort. Let's hope that the exciting future ahead is in my hands and not some mongrel thief! :-D

Fred.

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Sun Feb 21, 2016 9:26 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.