DIYEFI.org Forum
http://forum.diyefi.org/

Matthijs' Peugeot 309 2.0 Turbo (#25)
http://forum.diyefi.org/viewtopic.php?f=55&t=2333
Page 1 of 3

Author:  Matthijs [ Sun Nov 03, 2013 10:03 pm ]
Post subject:  Matthijs' Peugeot 309 2.0 Turbo (#25)

Whoa, it started! :mrgreen:
http://www.youtube.com/watch?v=ycgYQhhl0cg&hd=1

Thanks Fred, Andy, Malcom and every other who had help desk duty at the IRC channel :lol2:

I've added a log file for proving purposes ;)

I needed to change the decoder offset to 112 instead of the 117 initial value I used, and inverted (360-112).
Also switched the VR + and VR- wires to get sync, added a 1n4007 to the switched input (long story about a multirelay blabla).

Now I can pretty up some things like replacing the Lm2940 so it can use the casing for cooling, getting a constant 12v for BRV instead of the switched one who passes to much diodes (multirelay, the 1n4007) so it drops towards 10.5v or so.

It goes unsaid I'm SUPER excited and happy I got my dream engine in my dream car with my DIY FreeEMS!

Attachments:
2013.11.03-21.27.23.bin.zip [203.99 KiB]
Downloaded 331 times

Author:  AiToR51 [ Sun Nov 03, 2013 11:56 pm ]
Post subject:  Re: Peugeot 2.0 Turbo on CardS12

congratulations!

Author:  Hentai [ Mon Nov 04, 2013 12:13 am ]
Post subject:  Re: Peugeot 2.0 Turbo on CardS12

I had the same issues trying to check timing and hardly got anything from the timing light.

Author:  Fred [ Mon Nov 04, 2013 4:59 am ]
Post subject:  Re: Peugeot 2.0 Turbo on CardS12

Congratulations man! Number 1 in Holland, BUT, your post is in the wrong section, so I'm splitting it off :-p

Author:  Fred [ Mon Nov 04, 2013 5:41 am ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

viewtopic.php?f=55&t=1568
viewtopic.php?f=41&t=2174

Updated! :-)

Author:  DeuceEFI [ Mon Nov 04, 2013 1:26 pm ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Congratulations!
8-)

Author:  sim [ Mon Nov 04, 2013 1:55 pm ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Nice work!

Author:  ToxicGumbo [ Mon Nov 04, 2013 3:45 pm ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Read this news while on the drive back from a vacation. Congratulations!


-Jeff

Author:  HD13 [ Mon Nov 04, 2013 6:16 pm ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Mathijs, nice job !!

Author:  walinsky [ Tue Nov 05, 2013 12:56 am ]
Post subject:  Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Nice job! Gratz!

Page 1 of 3 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/