Page 1 of 3

Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Sun Nov 03, 2013 10:03 pm
by Matthijs
Whoa, it started! :mrgreen:
http://www.youtube.com/watch?v=ycgYQhhl0cg&hd=1

Thanks Fred, Andy, Malcom and every other who had help desk duty at the IRC channel :lol2:

I've added a log file for proving purposes ;)

I needed to change the decoder offset to 112 instead of the 117 initial value I used, and inverted (360-112).
Also switched the VR + and VR- wires to get sync, added a 1n4007 to the switched input (long story about a multirelay blabla).

Now I can pretty up some things like replacing the Lm2940 so it can use the casing for cooling, getting a constant 12v for BRV instead of the switched one who passes to much diodes (multirelay, the 1n4007) so it drops towards 10.5v or so.

It goes unsaid I'm SUPER excited and happy I got my dream engine in my dream car with my DIY FreeEMS!

Re: Peugeot 2.0 Turbo on CardS12

Posted: Sun Nov 03, 2013 11:56 pm
by AiToR51
congratulations!

Re: Peugeot 2.0 Turbo on CardS12

Posted: Mon Nov 04, 2013 12:13 am
by Hentai
I had the same issues trying to check timing and hardly got anything from the timing light.

Re: Peugeot 2.0 Turbo on CardS12

Posted: Mon Nov 04, 2013 4:59 am
by Fred
Congratulations man! Number 1 in Holland, BUT, your post is in the wrong section, so I'm splitting it off :-p

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Mon Nov 04, 2013 5:41 am
by Fred

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Mon Nov 04, 2013 1:26 pm
by DeuceEFI
Congratulations!
8-)

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Mon Nov 04, 2013 1:55 pm
by sim
Nice work!

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Mon Nov 04, 2013 3:45 pm
by ToxicGumbo
Read this news while on the drive back from a vacation. Congratulations!


-Jeff

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Mon Nov 04, 2013 6:16 pm
by HD13
Mathijs, nice job !!

Re: Matthijs' Peugeot 309 2.0 Turbo (#25)

Posted: Tue Nov 05, 2013 12:56 am
by walinsky
Nice job! Gratz!