engine specs is:
2.0 16v with MLS head gasket
forged rods and used forged mahle opel C20XE pistons. Should give me around 8:1 of CR. I would prefered to be on 9:1 but this piston combo is the CR which it gives to me.
DIY Exhaust manifold
383cc/min Nissan skyline R33 RB25DET sidefeed injectors. I need bigger ones.. If anybody can recommend me a set I'm open to ideas. Here the most common is top feed injectors, but this engine has sidefeed.
Firstly started on MS, but yesterday I drove it a little on FreeEMS. I've to tune VE tables a little more.
for the moment, turbo spool is not good. I'm controlling it by canbus commands.