Page 1 of 3
HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Mon Jan 28, 2013 7:01 am
by HotCat
Owner: Yu Zhou
Make: PSA
Model: 01 Citroen ZX 7160AXC
Engine: PSA TU5JP/K, SOHC
Capacity: 1587cc
Wheel pattern: Crank 60-2
VR sensor offset: 246 degree
Controls: Both fuel & ignitions, replace OEM ECU completely
Hardware: I design it
Repository:
https://github.com/HotCat/FireCat
Description: Special design to reuse OEM box and harness, onboard IC ignitors
ECU build thread:
viewtopic.php?f=54&t=1981
Videos:
This is the most terrible effect I've every made. I decide to reproduce it this week if I can find an assistant
http://www.sendspace.com/file/utmyia
photos:
Re: HotCat's Citroen ZX TU5JP/K engine is running(18th)
Posted: Mon Jan 28, 2013 7:43 am
by Fred
You're a hero! First in China! First of millions, perhaps? :-) Well done, mate, and thanks for your patience and determination!
Re: HotCat's Citroen ZX TU5JP/K engine is running(18th)
Posted: Mon Jan 28, 2013 7:53 am
by Fred
Re video, we need to get you some server/upload space so we can youtube it for you! Let me know if you can find a way to upload the raw file(s) across the G-firewall, if not, we'll sort something out for you. You could use unix "split" to chunk it into 20meg blocks and email them to me if you want :-)
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Mon Jan 28, 2013 10:50 am
by masterkorp
Congrats!
I can provide hosting for the upload.
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Mon Jan 28, 2013 12:46 pm
by Dan
Congratulations! (love the fire extinguisher in the photo too)
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Mon Jan 28, 2013 1:06 pm
by Hentai
Anyone else notice the CatSquirt on the board?
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Tue Jan 29, 2013 8:13 am
by DeuceEFI
Congratulations on getting your board design sorted out HotCat!
And welcome to the first 20 FreeEMS vehicle list
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Wed Jan 30, 2013 2:51 am
by HotCat
DeuceEFI wrote:Congratulations on getting your board design sorted out HotCat!
And welcome to the first 20 FreeEMS vehicle list
I have another GM 3.0 v6 engine on my 99 Buick Regal, I wish to do ignition using FreeEMS because the engine can not output enough power when the RPM is above 1600, the stock ECU ignore the 24x crank input but calculate the engine RPM by 3x output from ignition module. I think this is the performance bottle-neck. What's your opinion? I found it is difficult to crank the engine by hand to mark the timing mark
This should be the next FreeEMS powered car in China
Re: HotCat's Citroen ZX TU5JP/K engine is running(18th)
Posted: Wed Jan 30, 2013 3:46 am
by HotCat
Fred wrote:Re video, we need to get you some server/upload space so we can youtube it for you!
I've already use sendspace to share my video, the the video was badly taken, I must reproduce it on daylight
Re: HotCat's Citroen ZX TU5JP/K engine is running (18th)
Posted: Wed Jan 30, 2013 5:40 am
by JareeB
congrats!!