Beginner needs some advice

For people running FreeEMS to discuss it and ask any questions about using and adjusting it.
gyro
TO92 - Vaguely active
Posts: 2
Joined: Mon Jul 16, 2018 3:52 am

Re: Beginner needs some advice

Post by gyro »

SMD is outside my skill set, I don't have the gear and have trouble seeing tiny pins now.
Where can I find a datasheet on the processor? General search turns up everything but.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Beginner needs some advice

Post by Fred »

https://www.nxp.com/products/processors ... mcus:S12XD?
https://www.nxp.com/docs/en/data-sheet/ ... 12RMV2.pdf

Agreed, searching didn't do me much good, either. But it wasn't too hard to find on nxp.com so there you go.

http://coolefi.com/products/ecu/15-cool ... c-ecu.html < Andy's commercial product. I can't vouch for it, yet, but I should change that ASAP.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
miamitraffic
TO220 - Visibile
Posts: 7
Joined: Tue Jan 30, 2018 2:23 pm

Re: Beginner needs some advice

Post by miamitraffic »

miamitraffic wrote:It does. Im looking forward to start the process around November this year.
Hey guys, im back at it... altough there were some delays, i finally equipped the engine with suitable BMW K1200GT ITBs. Want to start with electronics soon.

See you.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Beginner needs some advice

Post by Fred »

Oh hi! Necro thread is standard around here these days :-D You'll fit right in.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply