Global timing offset...does it exist?

For people running FreeEMS to discuss it and ask any questions about using and adjusting it.
Post Reply
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Global timing offset...does it exist?

Post by pishta »

My non adjustable (advance/retard) VR sensor is off about 2 degrees from TDC. Dont know, it just happened to end up like that after measuring a few times. Does Jaguar firmware allow you to change the timing offset? Mine is a slow build for sure!
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Global timing offset...does it exist?

Post by Fred »

Yes, of course. It's called decoder-offset.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: Global timing offset...does it exist?

Post by Fred »

DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
pishta
LQFP112 - Up with the play
Posts: 147
Joined: Wed Aug 28, 2013 6:07 am

Re: Global timing offset...does it exist?

Post by pishta »

great, I thought it was in there somewhere. Huh, So I could have mounted that sensor just about anywhere! Thanks for the link, pressing on....
Post Reply