Injection Style Options
Posted: Sun Oct 28, 2012 2:43 pm
Top left represents sequential injection.
Second in represents semi-sequential injection.
3 and 4 run OK with multiple injections.
5-8 might run OK, or might run poorly, and require an accurate dead time setup, BRV value, etc etc.
9-12, FFS, you have a f***ing 12 cylinder, do it justice! :-p
Yellow, upgrade your wiring to take advantage of your signals/engine.
Yellow with cross, you're brain dead, go away.
Grey = not possible at all. Not without horrid hackage.
Red = get f***ed, go elsewhere, unsupported inconsistent operation.
Purple, can't use M$, upgrade your sensor HW and run FreeEMS!
Also, read this: http://faq.freeems.org/#notgood
Fred.