Injection Style Options

For people running FreeEMS to discuss it and ask any questions about using and adjusting it.
Post Reply
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Injection Style Options

Post by Fred »

Image

Top left represents sequential injection.
Second in represents semi-sequential injection.
3 and 4 run OK with multiple injections.
5-8 might run OK, or might run poorly, and require an accurate dead time setup, BRV value, etc etc.
9-12, FFS, you have a f***ing 12 cylinder, do it justice! :-p
Yellow, upgrade your wiring to take advantage of your signals/engine.
Yellow with cross, you're brain dead, go away.
Grey = not possible at all. Not without horrid hackage.
Red = get f***ed, go elsewhere, unsupported inconsistent operation.
Purple, can't use M$, upgrade your sensor HW and run FreeEMS!

Also, read this: http://faq.freeems.org/#notgood

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply