DIYEFI.org Forum

Posted: **Fri Mar 09, 2012 7:10 am**

Users unite! Post configuration information about your hardware, software, and diagnostics equipment here so that we can better work together on troublesome issues and installs. This will also give us a bird's eye view of who's using which builds, what hardware, and who has the potential to test specific scenarios. For the purposes of this thread, update your information as often as if changes!

Obtaining build version information:

If you're using debs/exe installers, specify the filename.
If you've obtained a project with a release cycle through Git, enter your cloned or checked out copy's top level directory and type 'git describe' or 'git log | head -1'.
If you're using a project that doesn't have any obvious release information, note the date you obtained a copy and when it was compiled.

Only use this thread to post configuration information.
Discussion should go here: viewtopic.php?f=54&t=1638.

Post Template: (Please copy/use this)

Code: Select all

[u][b]Computer 1:[/b][/u]
[list]
  [*][b]OS/Rel:[/b] 
  [*][b]Arch:[/b] 
  [*][b]Toolchain:[/b] 
  [*][b]FreeEMS-Loader:[/b]
  [*][b]MegaTunix:[/b] 
  [*][b]OpenLogViewer:[/b] 
[/list]

[u][b]Hardware:[/b][/u]
[list]
  [*][b]Board(s):[/b] 
    [list]
      [*] <board #1 here> running <firmware hash>
      [*] <board #2 here> running <firmware hash>
    [/list]
  [*][b]USB-to-Serial adapter(s):[/b] 
    [list]
      [*]
      [*]
    [/list]
[/list]

[u][b]Dev Equipment:[/b][/u]
[list]
  [*]
  [*]
[/list]

[u][b]Real Engines:[/b][/u]
[list]
  [*]
  [*]
[/list]

Edit: 17 March Fred removed draft status and added git log advice

Posted: **Fri Mar 09, 2012 7:13 am**

Computer 1:

OS/Rel: Kubuntu 10.04
Arch: AMD64
Toolchain: Latest
FreeEMS-Loader: Latest
MegaTunix: 4f97471
FreeEMS Studio: Latest
OpenLogViewer: cde2c4d w/ Maven 3.0.4

Computer 2:

OS/Rel: Windows 7
Arch: AMD64
FreeEMS-Loader: Latest
MegaTunix: 4f97471
OpenLogViewer: cde2c4d w/ Maven 3.0.4

Computer 3:

OS/Rel: Mac OS X 10.7.5 w/ Xcode 4.3.3
Arch: 3.4GHz i7
Toolchain: Latest
FreeEMS-Loader: Latest
FreeEMS-Tuner: r20091105152800
MegaTunix: 7fe51d7
EMStudio: a835282
OpenLogViewer: c43d3f8 w/ Maven 3.0.4

Hardware:

Board(s):
- TA Adapt9S12XDP512M2 Rev20 (unmodified) running cb698b5
- MegaSquirt 2 (for testing MTX features)
USB-to-Serial adapter(s):
- KeySpan ZT3241E
- Dynex PL2303

Dev Equipment:

Rigol DS 1052E oscilloscope
Fluke 87V multimeter
Open Workbench Logic Sniffer (32 channels)
Aoyue 968 soldering station
PCB etching materials
Schmartboards: (6x) 202-0031-01

Real Engines:

2004 Toyota 2.4L 2RZ-FE (Build page)
2008 GM 2.4L EcoTec

Posted: **Sat Mar 10, 2012 1:58 am**

Computer 1: roadeee

OS/Rel: Debian unstable + patch upgrades (dual boot with Windows 7 Starter, not booted for months/years)
Arch: Atom 280 single core 1.6
Toolchain: Release from tools site
FreeEMS-Loader: No idea
MegaTunix: No idea
OpenLogViewer: No idea

Computer 2: freeair

OS/Rel: OS X 10.6
Arch: Core2duo 2.19gHz
Toolchain: Assorted, from source, not used to build for real hardware, only to compile
FreeEMS-Loader: No idea
MegaTunix: No idea
OpenLogViewer: Latest

Computer 3: cheetah

OS/Rel: Debian unstable + patch upgrades (Dual boot with OSX 10.6, not booted since Debian install)
Arch: Core2duo 2.4gHz
Toolchain: Release from tools site
FreeEMS-Loader: Latest
MegaTunix: Latest
OpenLogViewer: Latest

Computer 4: rwdlsd

OS/Rel: Debian unstable + patch upgrades
Arch: Atom 330 dual core 1.6
Toolchain: Ancient
FreeEMS-Loader: Ancient if at all
MegaTunix: Ancient if at all
OpenLogViewer: Ancient if at all

Computer 5: raptor

OS/Rel: Top secret
Arch: 32 bit VM
Toolchain: Release from tools site
FreeEMS-Loader: N/A
MegaTunix: N/A
OpenLogViewer: N/A

Computer 6: wifeee

OS/Rel: Windows 7 starter (Spanish/Español)
Arch: Atom no idea
Toolchain: Relase from tools site
FreeEMS-Loader: One off win build from months ago
MegaTunix: One off win build from months ago
OpenLogViewer: One off jar from months ago

Computer 7: XP VM

OS/Rel: Windows XP
Arch: 32 bit VM
Toolchain: No idea
FreeEMS-Loader: No idea
MegaTunix: No idea
OpenLogViewer: No idea

Computer 8: Debian VM

OS/Rel: Debian not sure which ?
Arch: 32 bit VM
Toolchain: No idea
FreeEMS-Loader: No idea
MegaTunix: No idea
OpenLogViewer: No idea

Computer 9: Ucuntu VM

OS/Rel: Ucuntu 12.04 pre-release updated 9th March 2012
Arch: 32 bit VM
Toolchain: CodeWorrier (spop)
FreeEMS-Loader: No
MegaTunix: No
OpenLogViewer: No

Computer 10: Wifeworks

OS/Rel: Windows Vista (Spanish/Español)
Arch: No idea
Toolchain: No
FreeEMS-Loader: No
MegaTunix: No
OpenLogViewer: No

Hardware:

Board(s):
- TA running ?
- PumaS1 running ?
USB-to-Serial adapter(s):
- FTDI (in Puma)
- FTDI (RS232 Adapter)
- PL2303
- HW RS232 in rwdlsd
- DSE cheapy
- Other cheapy

Dev Equipment:

DSO Quad (2 probes, 2 clips)
Saleae (8 clips)
OpenBench LogicSniffer (32 clips)
FredStim
JimStim, broken
Original bench rig
2x SLC_OEM eval
5x TPIC8101 chips
2x CAN chips
2x Freescale USB2SER chips
2x TI USB3401? chips
Assorted S12X chips
Assorted hand tools
Vellemen tstat soldering station
Rommelsbacher-Cooke reflow oven
TA USBDM

Real Engines:

None :-(

Posted: **Sat Mar 10, 2012 3:33 am**

Computer 1: DeuceEFI

OS/Rel:Debian 6.0.4 32-bit "squeeze"
Arch:Intel Atom Single-Core/1.5Gb RAM
Toolchain:Release from tools site (32-bit)
MegaTunix:megatunix 0.9.24-SNAPSHOT_6e2744
OpenLogViewer:Not yet installed
KiCAD:2010-03-14

R.I.P.Computer 2: DeuceEFI_desk

OS/Rel:Debian 6.0.4 32-bit
Arch:AMD Athlon II X2 220 Dual-Core/ 3Gb RAM
Toolchain:Release from tools site (32-bit)
MegaTunix:megatunix 0.9.24-SNAPSHOT_6e2744
OpenLogViewer:Not yet installed
KiCAD:2010-03-14

Computer 3: Andy-LT

OS/Rel:Windows 7 64-bit
Arch:Intel Pentium Dual-Core T4500/ 3Gb RAM
Firmware:No
Toolchain:No
MegaTunix:No
OpenLogViewer:No
KiCAD:2011-07-08 BZR 3044
Codewarrior:Version 6.1 Build 10221 (only for HiWave.exe debugger to flash with TBDML)

Computer 4: FreeEMS-Tuner

OS/Rel:Lubuntu 12.04 32-bit
Arch:Intel Dual-Core/4Gb RAM
Toolchain:Release from tools site (32-bit)
MegaTunix:megatunix 0.9.24-SNAPSHOT_6e2744
EMStudio:an older version and a newer dev version, will post hashes later
OpenLogViewer:very old version for FreeEMS LA and a newer release, will post hashes later
KiCAD:2010-03-14

Hardware:

Boards:
- DIY TA style 112pin MCU prototype on a SchmartBoard, serial comms only
- TA board with all recommended modifications
- Jaguar A2 prototype, only for MCU and USB comms testing
- Jaguar A3 prototype, Serial #1
- MS2
USB-to-Serial adapter(s):
- USB to Serial: Prolific Technology, Inc. PL2303 Serial Port adapter
- USB-to-Serial adapter: FTDI (on Jaguar boards)

Dev Equipment:

Assorted DMMs (I never go anywhere without one)
Saleae (8 channel Logic)
OpenBench Logic Sniffer with Buffer Wing (32 channels)
DSO Quad
JimStim
Additional S12X 112-pin MCUs
Additional S12X 144-pin MCUs
Assortment of hand tools
Weller soldering station
DIY Reflow Soldering Oven (Black & Decker 1200W with custom controller)
DIY TBDML

Real Engines:

1989 GM 2.8L V6 with DIS
1989 GM 3.8L V6 with DIS
1996 GM 2.2L I4 with DIS - FreeEMS conversion in progress 11/6/2012
1996 GM 3100 V6 with DIS - FreeEMS engine #11
1997 Ford 3.8L V6 with EDIS
2005 Toyota Matrix 1.8L I4 with COP (future RAVAGE engine)

EDIT: on 4/7/2012 to update Development Equipment.
EDIT: on 11/6/2012 to add DSO Quad and update computers

Posted: **Sat Mar 10, 2012 7:51 am**

Computer 1: AKA preludelinux

OS/Rel: Ubuntu 10.04 LTS
Arch: core2quad 8GB Ram 2.4ghz
Toolchain: Outdated 64bit debs version ???

Computer 2: AKA preludelinux_lap

OS/Rel: Ubuntu 10.04 LTS
Arch: core2duo 4GB Ram laptop 2.2 ghz
Toolchain: built my own 64bit from source

Computer 3: AKA preludelinux_dev

OS/Rel: Ubuntu 10.04 LTS
Arch: AMD64x2 4200 4GB Ram garage pc
Toolchain: OLD outdated .debs 64bit version ???

Computer 4: AKA preludelinux_tv

OS/Rel: Ubuntu 10.04 LTS
Arch: AMD64x4 3.8ghz 8GB Ram tv pc

Common Development Environment

Toolchain: Newest 64bit deps when 64bit builds become available.
FreeEMS-Loader: Current from Git updated daily git://github.com/seank/freeems-loader.git
MegaTunix: Current from Git updated daily git://github.com/djandruczyk/MegaTunix.git
OpenLogViewer: Current from Git updated daily git://github.com/BenFenner/OpenLogViewer.git

Hardware:

Board(s):
- TA Card #1 - Most Current Firmware
- DIY TA Card#2-11! - Nothing yet i have to build them and Document them!
USB-to-Serial adapter and extra boards(s):
- pl2303 usb > serial x2
- jimstim
- MS2

Dev Equipment:

2x scopes
Many Multimeter
Auyou Soldering Workstation
boxes and boxes of electronic parts
plain soldering and de-soldering gun / solder sucker , misc tools
plans to get more!
LA 32 port from seed studio

Engines / Cars

1987 325 BMW E30
m52b28 NA engine FreeEMS will run it soon!
plans to get more cars and engines!

Posted: **Tue Apr 03, 2012 4:50 am**

Earth

OS/Rel: Windows 7 64-bit
OS/Rel: Mac OS X Lion
OS/Rel: Ubuntu 10.04 LTS 64-bit
Arch: Intel i7 2600k
Toolchain:
FreeEMS-Loader:
MegaTunix:
OpenLogViewer:

SnowWhite

OS/Rel: OS X Lion
OS/Rel: Windows 7 64-bit
Arch: Core 2 Duo T7200
Toolchain:
FreeEMS-Loader:
MegaTunix:
OpenLogViewer:

Hardware:

Board(s):
USB-to-Serial adapter(s):
- Arduino piggyback
- Assorted FTDI FT232R

Dev Equipment:

Fluke 73 DMM
Weller soldering station
Et al.

Real Engines:

Jaguar 5.3L HE V12 Engine w/ GM TH400 for 1972 XJ12 conversion project (first up)
(Reference) Jaguar 5.3L HE V12 with Lucas Digital-P in 1982 Daimler Double-Six (UK-Spec/Emissions)
(Reference) Jaguar 5.3L HE V12 with Lucas Digital-P in 1985 Jaguar Sovereign HE (US-amended Euro emissions)
(Reference) Jaguar 5.3L V12 with Bosch D-Jetronic in 1977 Jaguar XJ12L
Assorted Jaguar XK I6 Engines in pieces, with Stromberg carbs
Jaguar 4.2L XK I6 Engine (damaged) with Strombergs in 1976 Jaguar XJ6L 4.2L
Jaguar 4.2L XK I6 Engine (damaged) with Bosch L-Jetronic in 1979 Jaguar XJ6L
4.0L AMC I6 in 1987 Jeep Wagoneer
VW I4 2.0T in 2008 VW Jetta Wolfsburg Edition 2.0T

Posted: **Tue Oct 23, 2012 1:52 pm**

Computer 1:

OS/Rel: Kubuntu 12.04
Arch: x64\
Toolchain: None
FreeEMS-Loader: 0.1.0-SNAPSHOT-282-ge5def3a
MegaTunix: 0.9.24-SNAPSHOT-1187-gb6a737b
OpenLogViewer: 0.0.3-SNAPSHOT-119-g1a476d2
EMStudio: Newer than in git

Hardware:

Board(s):
- TA Card, running random bench test firmwares
- Jaguar Serial #3, running latest Listener firmware
- Unassembled Jaguar from Kennybug. Not running or even assembled
USB-to-Serial adapter(s):
- http://www.technologicalarts.ca/catalog ... cts_id=458
- Random assorted no-name USB to Serial adapters

Dev Equipment:

HP 54501A 68ch Logic Analyzer
HP 1662A 100MHz Digitizing Oscilloscope
Fluke TrueRMS Multimeter
Weller 50W adjustable temp soldering iron
JimStim
Tons of assorted Arduinos, relay boards, random assorted components
Assorted ARM dev boards, Sheeva Plug, Beaglebone, etc

Real Engines:

1987 Small Block Chevy 383
2002 Mazda Protege LX, 2.0l
2007 Yamaha VStar 650, carbureted

DIYEFI.org Forum

User Configurations and Equipment

User Configurations and Equipment

Re: User Configurations and Equipment

Re: User Configurations and Equipment

Re: User Configurations and Equipment

Re: User Configurations and Equipment

Re: User Configurations and Equipment

Re: User Configurations and Equipment