Page 1 of 1

How To Get Running On FreeEMS

Posted: Tue May 24, 2011 2:22 pm
by Fred
This thread is to consist of links to threads with content, a sort of guide to guides thread.

If you're an absolute noob, you may want to read this first:

viewtopic.php?f=54&t=1241

There is a link back to this thread at the bottom for your convenience! :-)

First, determine that FreeEMS can meet your current needs by reading this thread:

viewtopic.php?f=54&t=1084

Second, obtain suitable hardware, this step has no guide at this time, and is currently not exactly straight forward. That should change over the next few months. In the mean time, check out the 3rd post of the comments thread for a dated status of this: viewtopic.php?f=54&t=1167&p=16835#p16835

Third, setup your configuration parameters/configure your settings per this, yet to be completed, thread:

viewtopic.php?f=54&t=1085

Fourth, setup the system on the vehicle, performing basic checks etc:

viewtopic.php?f=54&t=1083

Fifth, rough-tune the vehicle and begin fine tuning the vehicle:

viewtopic.php?f=54&t=1165

Advanced Stuff:

viewtopic.php?f=54&t=1114 - Injection Timing Gotchas

If you have feedback on this thread, what it links to, what it doesn't link to, what you think it should or shouldn't link to, post in the comments thread here:

viewtopic.php?f=54&t=1167

Fred.