DIYEFI.org Forum

Posted: **Wed Aug 28, 2013 8:12 pm**

I want to get myself some toothed wheel + VR sensor assembly so that I can play without on a bench, without the rest of the engine. I guess that eliminates all the crankshaft wheels / sensors - I do not want the whole small block on the table

Maybe something integrated into the distributor, so that there would be a shaft I can spin by hand and a case? Has to be 80/90s or early 2000s so that I would find it in a junk yard.

Does any car match these criteria?

Posted: **Wed Aug 28, 2013 8:14 pm**

Toyota dizzy, but why VR, just use a square wave and bypass your signal conditioner...

Posted: **Wed Aug 28, 2013 8:29 pm**

Fred wrote:Toyota dizzy, but why VR, just use a square wave and bypass your signal conditioner...

Because I want to test my signal conditioner

Something like this 1994 Camry?

Do not see any missing tooth but that does not matter. Thank you for the fast response!

Posted: **Wed Aug 28, 2013 9:44 pm**

Yep, those are a good test of your circuitry. Why reinvent the wheel?

DIYEFI.org Forum

Examples of missing tooth CAM VR device?

Examples of missing tooth CAM VR device?

Re: Examples of missing tooth CAM VR device?

Re: Examples of missing tooth CAM VR device?

Re: Examples of missing tooth CAM VR device?