A bit of information please. FeeMS2 test

FreeEMS topics that aren't specific to hardware development or firmware development.
Post Reply
jawier130
TO220 - Visibile
Posts: 6
Joined: Fri Feb 27, 2015 9:47 am

A bit of information please. FeeMS2 test

Post by jawier130 »

Hi to all, i want test the FreeMS2 (https://github.com/fredcooke/FreeMS2) from on a MS2 (PCBv3.0) ecu.
I burn the bootloader (FreeMS2-SerialMonitor-1.0.s19) with USBDM. https://github.com/fredcooke/FreeMS2/bl ... or-1.0.s19
But now, how can i load the firmware? i no found Loader installer, (windows) (http://powerefi.com/files/FreeEMS-Loade ... er-RC7.exe)
If i use my USBDM ot hcs12mem with TBDML, the ecu not response.??????????????????
I am try connect it with "EMStudioInstaller.i386.DEV.2014-05-08_21-38-50"

I do not want to have to compile the loader. https://github.com/seank/freeems-loader :oops:
Nobody can share the loader installer, please? :?

I was looking the code, can MS2 processor use 6 injector ports really? :o :o :o
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: A bit of information please. FeeMS2 test

Post by Fred »

I've got some bad news for you! FreeMS2 is a VERY old version of FreeEMS ported to MS2 hardware, however it has NO comms implemented as you can't use the same strategy on MS2 due to a lack of RAM. Equally it requires a paged tuning model, which we do not do yet. It's not written into FreeMS2, either. I basically got the base running and gave up as it's not worth the trouble. Throw MS2 in the bin, be happy :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply