Contribute to a 0.7-Jaguar BOM/kit for Fred

FreeEMS topics that aren't specific to hardware development or firmware development.
Post Reply
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Contribute to a 0.7-Jaguar BOM/kit for Fred

Post by Fred »

Hello people of the world,

In some weeks Jaguar 0.7-alpha boards will be produced, and as is tradition, I'll get one to play with and review. What I'd like to do is get 2 and a BOM for one of them, so I can have another decent FreeEMS box laying around. I currently only have one good FreeEMS box, my modified 0.6-alpha. I can't ask Andy to cover this, as it's just too much and he has to cover his own BOM costs to do the same thing, anyway. So I'm asking you to pledge partial funding numbers here such that when it's time a set can be paid for and I can do my usual build/review/test cycle.

So, if you can afford to contribute some $ toward a Jaguar 0.7-alpha BOM for me, please PM or post the amount you can contribute. I guess the total cost is around 300usd or so, as I'll completely build it from scratch myself. Payment will be direct to Andy and any excess can either go to him or to the 0.8 BOM for the same reasons :-)

Thanks for your support, past, present and future!

Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply