No no no, I don't want you to send me cartoon porn :-p
There is a user on this forum, and quite a few others too, called Hentai.
You can spot him by some of the unique and outrageous things that he does. Through time, in the pecking orders of other forums, he's earned a reputation of not being so bright. Those of us with a sharper eye have watched young Hentai grow over the years and learn through trial error and analysis. He's rarely given credit for this on his regular forums which are largely full of homosexual hair dressers.
On one particular forum that most members here are familiar with, Hentai is largely ignored, and occasionally mocked in subtle rule-compliant ways. He's shown no respect and his grammar/spelling don't help matters, either. He actually knows what he's talking about with respect to some aspects of his build, and yet, time and time again, he's ignored by those clowns who don't actually know what they're doing at all.
Hentai's one wish in life, god only knows why, is to run MAF and have it work properly. I've vowed to help him with that should he get FreeEMS hardware installed on his mighty-miata. What's certain is that he'll never get satisfactory results from his current toy ECU.
So, if we could find the know-how and funds/supplies/PCBs/CPUs/etc to get Hentai a minimal working FreeEMS hardware setup, that's be great!
Any takers?
Fred.
Sponsor Hentai
Sponsor Hentai
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Sponsor Hentai
I have 3 bare Jaguar A3 boards left, I could set him up with:
a PCB,
the MCU with the Serial Monitor loaded,
the MAX9926,
the USB UART
and the Injector/Fuel Pump/Fan drivers.
This will be a functional MCU/all silicon components board with the capabilities of a TA board.
By the way, you will need to use the input labeled MAF but you will need to condition/protect the MCU input or use the MAT input and cut the trace leading to the MCU (I can provide that service or show a photo of that for you to do) and connect that conditioning/protection circuit to the MAF-Signal input to the MCU.
Now can someone else supply him with the rest of the passive components?
The entire BOM can be found in my repository: https://github.com/DeuceEFI/Jaguar
a PCB,
the MCU with the Serial Monitor loaded,
the MAX9926,
the USB UART
and the Injector/Fuel Pump/Fan drivers.
This will be a functional MCU/all silicon components board with the capabilities of a TA board.
By the way, you will need to use the input labeled MAF but you will need to condition/protect the MCU input or use the MAT input and cut the trace leading to the MCU (I can provide that service or show a photo of that for you to do) and connect that conditioning/protection circuit to the MAF-Signal input to the MCU.
Now can someone else supply him with the rest of the passive components?
The entire BOM can be found in my repository: https://github.com/DeuceEFI/Jaguar
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
Re: Sponsor Hentai
Deuce, do you mean with the essential decouple caps so you can load the CPU on that very board? You can feed it 5V from outside the board during loading, no probs there.
Very generous offer, thanks!
Fred.
Very generous offer, thanks!
Fred.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
- DeuceEFI
- LQFP144 - On Top Of The Game
- Posts: 578
- Joined: Thu Feb 25, 2010 3:57 am
- Location: Gosport, IN USA
- Contact:
Re: Sponsor Hentai
Yes, it will include the decouple capacitors, but only for the MCU, Hentai will need to source the other passive components (ie: the decouple capacitors for the MAX9926, the FTDI and the 74HC86).Fred wrote:Deuce, do you mean with the essential decouple caps so you can load the CPU on that very board? You can feed it 5V from outside the board during loading, no probs there.
No worries, I'm tired of him complaining about the MegaPoo...Fred wrote:Very generous offer, thanks!
Andy.
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
FreeEMS vehicle #11, 1932 Ford 5 Window Coupe with a 1996 GM 3.1L SFI V6 with DIS ignition
FreeEMS vehicle #16, 1996 Chevrolet S10 2.2L SFI I4 with DIS ignition
Owner of http://www.coolefi.com
Re: Sponsor Hentai
I think that you weren't the only one! Now he can complain about FreeEMS instead. That'll be a nice change. It's hard to get people to complain :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Sponsor Hentai
I could send him my jag pcb. I will bridge the tx and rx lines so the comms will work without optos. I could populate whichever circuits he needs before i posted it too!
Re: Sponsor Hentai
Prefer that you keep yours and get some testing out of it at the rate other things are moving :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Sponsor Hentai
If Sean wants to help me get his code up to date so that I can run the fuel and ignition off of one mcu, I'll have an extra TA card.
:-p
Re: Sponsor Hentai
I wouldn't recommend that just yet. Looks like Andy has kindly covered it anyway. It's up to hentai to see it through now :-)
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Re: Sponsor Hentai
Updated first post with a special photo!
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!