View unanswered posts | View active topics It is currently Tue Aug 14, 2018 10:55 pm



Reply to topic  [ 23 posts ]  Go to page Previous  1, 2, 3  Next
Where to Start..... 
Author Message
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
DIYEFI Runs on this right?


http://www.technologicalarts.ca/catalog ... cts_id=367


Sat Nov 12, 2011 3:34 am
Profile
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
Well I'm new this DYI EFI, but I know engines as tuned them to run great since I was a kid. I have build a Microcontroller device to control C-Band dish, around a PIC16f877a with ASM. And I work as a Electronic Tech for a phone company. I look forward to play with this DYI-EFI.


Thinking a normal system that would control 3 spark coils, 6 injectors, 2 O2, and 1 Wide O2 sensor. When working with HHO it would maybe with only the wide 02 senser, and not the 02 sensors. This engine is a V6 3.4L with 3 spark coils.


Sat Nov 12, 2011 7:22 pm
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15181
Location: Home sweet home!
disneyjoe7 wrote:

DIYEFI.org runs on a Debian server, FreeEMS runs on the above board, among other things, yes :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Mon Nov 14, 2011 9:37 pm
Profile WWW
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
Fred,

Can I post a video about HHO?


Steve


Mon Nov 14, 2011 11:36 pm
Profile
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
Sorry to confuse some people here.

In short what I wish to do is redo an ECU to an engine so it could be able to handle HHO fuel injection.


See this video.

http://youtu.be/jJS8JFIqhh4


Tue Nov 15, 2011 8:12 am
Profile
Moderator
User avatar

Joined: Tue Jan 15, 2008 2:31 pm
Posts: 15181
Location: Home sweet home!
disneyjoe7 wrote:
Fred,

Can I post a video about HHO?

Steve

Strange question!!! You already did on the last post in the previous page, and, as I see, in the next post too! :-/

Don't feel the need to explain yourself for the sake of it :-)

_________________
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!


Tue Nov 15, 2011 10:35 am
Profile WWW
QFP80 - Contributor
User avatar

Joined: Sat Sep 24, 2011 12:27 pm
Posts: 91
Location: Australia
Quote:
My plan is to not wire the whole engine, but to get an ECU case so anything needed to do could be in the case, so the case / ECU could be installed and work or the original ECU could be re-installed so everything is stock again.


You will not be able to remove your OEM ECU and replace it with FreeEMS. There is alot of other 'stuff' that the OEM ECU does


Tue Nov 15, 2011 11:06 am
Profile
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
Fred wrote:
disneyjoe7 wrote:
Fred,

Can I post a video about HHO?

Steve

Strange question!!! You already did on the last post in the previous page, and, as I see, in the next post too! :-/

Don't feel the need to explain yourself for the sake of it :-)



I run another phpBB forum and I was able to post a video. A video that would show here, and not just a link. I'll check to see how I do it on my forum.


Tue Nov 15, 2011 12:20 pm
Profile
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
oden wrote:
Quote:
My plan is to not wire the whole engine, but to get an ECU case so anything needed to do could be in the case, so the case / ECU could be installed and work or the original ECU could be re-installed so everything is stock again.


You will not be able to remove your OEM ECU and replace it with FreeEMS. There is alot of other 'stuff' that the OEM ECU does


I know what you're saying but I think I can :idea: :geek: :ugeek:


Tue Nov 15, 2011 12:21 pm
Profile
DIP8 - Involved

Joined: Mon Nov 07, 2011 6:21 pm
Posts: 15
Ok jumped in with both feet. I ordered the Adapt9S12XDP512M2, I play with it and I learn it. :smile:


Mon Dec 19, 2011 9:18 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 23 posts ]  Go to page Previous  1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF. ColorizeIt.