In what state do you want your Puma board sent?

For organising group buys of automotive and electronic equipment and parts.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

In what state do you want your Puma board sent?

Post by Fred »

This is a thread to see who wants what mailed to them.

Options are:
  1. bare board
  2. CPU + min required to program it
  3. All SMD parts
Prices with shipping yet to be determined.

Option 1 was specced at $21us inclusive of p&p.
Option 2 is approx $75us for a bare basic programmed board ($22 mcu + few passives to load SM + PCB + labor + p&p).
Option 3 will likely be around $200us - $250us, but don't quote us on this, Marcos doesn't want to provide this service(fair enough, hard core only, remember), so you'll have to find someone to do this for you, maybe Jean in sufficient quantity.

There is no guarantee that Marcos (or others) will be willing to do this work for you. The original thread was specced as for hardcore only... I meant it! If you're lucky though, and scared of it, or cheap/stingy, you may ask nicely and get some of the harder work done for you.

Even if you get the All SMD option, you still need to provide and install the through hole components and figure out a connector, case, loom, future mods requiers as we figure them out, etc. Fix them if you blow it up, etc.

Comments and questions: viewtopic.php?f=38&t=1016

Post here to spec your order only! Other posts will be removed.

List of people/specs:

5 Marcos - Argentina - no info required, do as you please :-)
5 Abe - California/San Diego
2 Fred - New Zealand/Auckland - 1 x option 1, 1 x option 3 - I will do the through hole.
2 Seank - Arizona/Phoenix
1 Craig - New Zealand/Auckland
1 Joseph Davis - North Carolina - option 1
1 johntramp - New Zealand/Christchurch
1 Quan-Time - Australia/Adelaide
2 flyrdm - ?
1 em_knaps - New Zealand/Auckland
1 mops - New Zealand/Auckland
1 yoshifab - California/San Diego
1 Nick S - California/San Diego
1 phr34kr - New Zealand/Auckland - option 1
2 Karri - Finland!
1 jbelanger - Canada
1 dirtydsi - ?
1 colza - New Zealand/Napier - prefers option 2, can live with option 1
1 Motofab - California/South of LA somewhere before Mexico.
1 Gimpy - Nebraska - option 2
1 gearhead - usa - option 1
1 mtxman - New York/Rochester
2 cavehamster - ?
1 f1erce

Keen for a spare if available:

Hentai
DCramer
dealwithit
AldoQ - option 1

Spares:

Marcos 0 - 2
Abe 0 - 3
mtxman 1
Jean 0 - 1 - option 1
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
phr34kr
TO220 - Visibile
Posts: 4
Joined: Sun Dec 26, 2010 10:44 am

Re: In what state do you want your Puma board sent?

Post by phr34kr »

Option 1 at this stage. Cheers.
Colza
TO220 - Visibile
Posts: 7
Joined: Sun Dec 26, 2010 11:57 pm

Re: In what state do you want your Puma board sent?

Post by Colza »

Option 2 if possible.

Otherwise I can work with option 1 if I have to.
AldoQ
QFP80 - Contributor
Posts: 31
Joined: Fri Apr 04, 2008 1:26 am

Re: In what state do you want your Puma board sent?

Post by AldoQ »

Hi
if a spare is available: option 1
best regards
User avatar
jbelanger
LQFP144 - On Top Of The Game
Posts: 387
Joined: Sat Feb 23, 2008 8:58 pm
Contact:

Re: In what state do you want your Puma board sent?

Post by jbelanger »

If my board is not needed as a spare, option 1.
gimpy
QFP80 - Contributor
Posts: 31
Joined: Tue Dec 23, 2008 12:56 pm

Re: In what state do you want your Puma board sent?

Post by gimpy »

Put me down for option #2 please.
Gimpy
gearhead
LQFP112 - Up with the play
Posts: 120
Joined: Sun Feb 03, 2008 9:30 pm
Location: Chicago, USA

Re: In what state do you want your Puma board sent?

Post by gearhead »

I have a chip, and a BDM, so I think I can make do.

Make mine option 1.

My location is Chicago, USA.

Gearhead
Joseph Davis
DIP8 - Involved
Posts: 19
Joined: Fri Dec 24, 2010 5:04 pm

Re: In what state do you want your Puma board sent?

Post by Joseph Davis »

Option 1, please.
Bangbug
QFP80 - Contributor
Posts: 74
Joined: Fri Jan 14, 2011 11:03 pm
Location: Auckland New Zealand
Contact:

Re: In what state do you want your Puma board sent?

Post by Bangbug »

Option 3 please
Throw it in with Father Freds.
User avatar
Fred
Moderator
Posts: 15431
Joined: Tue Jan 15, 2008 2:31 pm
Location: Home sweet home!
Contact:

Re: In what state do you want your Puma board sent?

Post by Fred »

Prices updated to reflect reality of shipping costs and time spent etc. Argy post wont allow normal post, so tracked post is the only way to roll. With paypal fee, 5 buck board, and that, its 21usd each.
DIYEFI.org - where Open Source means Open Source, and Free means Freedom
FreeEMS.org - the open source engine management system
FreeEMS dev diary and its comments thread and my turbo truck!
n00bs, do NOT PM or email tech questions! Use the forum!
The ever growing list of FreeEMS success stories!
Post Reply